lkml.org 
[lkml]   [2015]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] ARM: dts: Use IOPAD pinmux for IGEP boards
From
Date
Hello Tony,

On 10/20/2015 06:26 PM, Tony Lindgren wrote:
> * Javier Martinez Canillas <javier@osg.samsung.com> [151019 08:39]:
>> Hello,
>>
>> This series use the IOPAD pinmux macros for the remaining IGEP boards that
>> still used the register offset instead of the physical address using these
>> macros so the DTS matches what is in the Technical Reference Manual.
>>
>> The changes are only cosmetic since they make the DTS easier to read but
>> does not change functionality. I built tested and compared the binary DTB
>> MD5 checksum and both matches before and after the series applied:
>>
>> Before
>>
>> d7a56205bdc54365d49d9a90dfe3fafb am335x-base0033.dtb
>> fa272fcdee65d7bf4c03bd5a6c5ec4fd omap3-igep0020.dtb
>> ba65bf74d8c6ea8e7bd8face17179e6e omap3-igep0020-rev-f.dtb
>>
>> After
>>
>> d7a56205bdc54365d49d9a90dfe3fafb am335x-base0033.dtb
>> fa272fcdee65d7bf4c03bd5a6c5ec4fd omap3-igep0020.dtb
>> ba65bf74d8c6ea8e7bd8face17179e6e omap3-igep0020-rev-f.dtb
>
> Good idea to test the dtb checksums :)
>

:)

> Applying all into omap-for-v4.4/dt thanks.
>

Thanks, I'm planning to convert the remaining OMAP dts but I'm quite busy
this week and traveling the next one so that would have to wait for v4.5

> Tony
>

Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America


\
 
 \ /
  Last update: 2015-10-20 19:41    [W:0.030 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site