lkml.org 
[lkml]   [2015]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/3] ARM: dts: Use IOPAD pinmux for IGEP boards
* Javier Martinez Canillas <javier@osg.samsung.com> [151019 08:39]:
> Hello,
>
> This series use the IOPAD pinmux macros for the remaining IGEP boards that
> still used the register offset instead of the physical address using these
> macros so the DTS matches what is in the Technical Reference Manual.
>
> The changes are only cosmetic since they make the DTS easier to read but
> does not change functionality. I built tested and compared the binary DTB
> MD5 checksum and both matches before and after the series applied:
>
> Before
>
> d7a56205bdc54365d49d9a90dfe3fafb am335x-base0033.dtb
> fa272fcdee65d7bf4c03bd5a6c5ec4fd omap3-igep0020.dtb
> ba65bf74d8c6ea8e7bd8face17179e6e omap3-igep0020-rev-f.dtb
>
> After
>
> d7a56205bdc54365d49d9a90dfe3fafb am335x-base0033.dtb
> fa272fcdee65d7bf4c03bd5a6c5ec4fd omap3-igep0020.dtb
> ba65bf74d8c6ea8e7bd8face17179e6e omap3-igep0020-rev-f.dtb

Good idea to test the dtb checksums :)

Applying all into omap-for-v4.4/dt thanks.

Tony


\
 
 \ /
  Last update: 2015-10-20 18:41    [W:0.033 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site