lkml.org 
[lkml]   [2015]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/2] dt-bindings: Sync the dts to this document
Date
Add the OTP gpio state, we need switch the pin to gpio state
before the TSADC controller is reset.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

Changes in v1:
- As the Doug comments, add the 'init' property to sync document.

Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
index ef802de..28e84f7 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -27,8 +27,9 @@ tsadc: tsadc@ff280000 {
clock-names = "tsadc", "apb_pclk";
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
- pinctrl-names = "default";
- pinctrl-0 = <&otp_out>;
+ pinctrl-names = "init", "default";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
#thermal-sensor-cells = <1>;
rockchip,hw-tshut-temp = <95000>;
rockchip,hw-tshut-mode = <0>;
--
1.9.1


\
 
 \ /
  Last update: 2015-10-21 05:01    [W:0.065 / U:0.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site