lkml.org 
[lkml]   [2015]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64
Date
The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence
this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND
for ARM64.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
drivers/mtd/nand/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3324281..a1b5819 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -393,7 +393,7 @@ config MTD_NAND_GPMI_NAND

config MTD_NAND_BRCMNAND
tristate "Broadcom STB NAND controller"
- depends on ARM || MIPS
+ depends on ARM || ARM64 || MIPS
help
Enables the Broadcom NAND controller driver. The controller was
originally designed for Set-Top Box but is used on various BCM7xxx,
--
1.9.1


\
 
 \ /
  Last update: 2015-10-16 11:21    [W:0.224 / U:5.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site