| From | Jacek Anaszewski <> | Subject | [PATCH/RFC v10 03/19] DT: leds: Add led-sources property | Date | Fri, 09 Jan 2015 16:22:53 +0100 |
| |
Add a property for defining the device outputs the LED represented by the DT child node is connected to.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> --- Documentation/devicetree/bindings/leds/common.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index a2c3f7a..29295bf 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -1,6 +1,10 @@ Common leds properties. Optional properties for child nodes: +- led-sources : Array of bits signifying the LED current regulator outputs the + LED represented by the child node is connected to (1 - the LED + is connected to the output, 0 - the LED isn't connected to the + output). - label : The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). @@ -33,6 +37,7 @@ system-status { camera-flash { label = "Flash"; + led-sources = <1 0>; max-microamp = <50000>; flash-max-microamp = <320000>; flash-timeout-us = <500000>; -- 1.7.9.5
|