lkml.org 
[lkml]   [2015]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH_V3 0/4] sound:soc: jz4740: DT, dynamic sampling, enable clocks
Date
Hi,

Here are a few simple patches for the jz4740.

First adds dynamic sampling support to jz4740-i2s.
Then two to add a simple binding and DT support.
Then a patch to set the clock rate for i2s.

These are in preparation for jz4780 and ci20 later on.

Patches are based on 3.19-rc6. Quite disjoint and stay within jz4740
so should apply easily on other trees.

If you would like to have them rebased to a different tree, please tell.

Thank-you

V3 changes:
Added dma binding to example but forgot to put it in required properties.

V2 changes:
Removed a redundant #define
Added #ifdef CONFIG_OF
Added dma in binding document
Removed a redundant call to clk_prepare_enable


Zubair Lutfullah Kakakhel (4):
sound: soc: jz4740: Add dynamic sampling rate support to jz4740-i2s
dt: sound: jz4740: Add binding documentation for jz4740-i2s
sound: soc: jz4740: Add DT support to jz4740-i2s driver
sound: jz4740: set i2s clk rate to 12MHz

.../bindings/sound/ingenic,jz4740-i2s.txt | 23 ++++++++++++++++++++++
sound/soc/jz4740/jz4740-i2s.c | 22 ++++++++++++++++++++-
2 files changed, 44 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt

--
1.9.1



\
 
 \ /
  Last update: 2015-01-26 16:01    [W:0.056 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site