lkml.org 
[lkml]   [2015]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] HID: i2c-hid: The interrupt should be level sensitive
Date
The Microsoft HID over I2C specification says two things regarding the
interrupt:

1) The interrupt should be level sensitive
2) The device keeps the interrupt asserted as long as it has more reports
available.

We've seen that at least some Atmel and N-Trig panels keep the line low as
long as they have something to send. The current version of the driver only
detects the first edge but then fails to read rest of the reports (as the
line is still asserted).

Make the driver follow the specification and configure the HID interrupt to
be level sensitive.

The Windows HID over I2C driver also seems to do the same.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/hid/i2c-hid/i2c-hid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index d43e967e7533..8f1dfc5c5d9c 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -785,7 +785,7 @@ static int i2c_hid_init_irq(struct i2c_client *client)
dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);

ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, ihid);
if (ret < 0) {
dev_warn(&client->dev,
--
2.1.4


\
 
 \ /
  Last update: 2015-01-26 15:41    [W:0.067 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site