lkml.org 
[lkml]   [2015]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/18] spi/xilinx: Convert bits_per_word in bytes_per_word
Date
Simplify the code by using the unit used on most of the code logic.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
drivers/spi/spi-xilinx.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index fce5d0b..5d3503a 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -87,7 +87,7 @@ struct xilinx_spi {
u8 *rx_ptr; /* pointer in the Tx buffer */
const u8 *tx_ptr; /* pointer in the Rx buffer */
int remaining_words; /* the number of words left to transfer */
- u8 bits_per_word;
+ u8 bytes_per_word;
int buffer_size; /* buffer size in words */
u32 cs_inactive; /* Level of the CS pins when inactive*/
unsigned int (*read_fn)(void __iomem *);
@@ -121,7 +121,7 @@ static void xilinx_spi_tx(struct xilinx_spi *xspi)
return;
}
xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
- xspi->tx_ptr += xspi->bits_per_word/8;
+ xspi->tx_ptr += xspi->bytes_per_word;
}

static void xilinx_spi_rx(struct xilinx_spi *xspi)
@@ -131,19 +131,19 @@ static void xilinx_spi_rx(struct xilinx_spi *xspi)
if (!xspi->rx_ptr)
return;

- switch (xspi->bits_per_word) {
- case 8:
+ switch (xspi->bytes_per_word) {
+ case 1:
*(u8 *)(xspi->rx_ptr) = data;
break;
- case 16:
+ case 2:
*(u16 *)(xspi->rx_ptr) = data;
break;
- case 32:
+ case 4:
*(u32 *)(xspi->rx_ptr) = data;
break;
}

- xspi->rx_ptr += xspi->bits_per_word/8;
+ xspi->rx_ptr += xspi->bytes_per_word;
}

static void xspi_init_hw(struct xilinx_spi *xspi)
@@ -246,7 +246,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)

xspi->tx_ptr = t->tx_buf;
xspi->rx_ptr = t->rx_buf;
- xspi->remaining_words = (t->len * 8) / xspi->bits_per_word;
+ xspi->remaining_words = t->len / xspi->bytes_per_word;
reinit_completion(&xspi->done);

while (xspi->remaining_words) {
@@ -403,7 +403,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
}

master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
- xspi->bits_per_word = bits_per_word;
+ xspi->bytes_per_word = bits_per_word / 8;
xspi->buffer_size = xilinx_spi_find_buffer_size(xspi);

xspi->irq = platform_get_irq(pdev, 0);
--
2.1.4


\
 
 \ /
  Last update: 2015-01-23 17:21    [W:0.163 / U:2.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site