lkml.org 
[lkml]   [2015]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND 2/4] ARM: dts: Add lid GPIO key device node for Peach boards
Date
The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have both
a power and lid GPIO keys but only the former was defined in the
DTS. Add DTS snippets for the lid GPIO key too. These were taken
from the downstream ChromeOS 3.8 kernel tree.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 18 +++++++++++++++++-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 19 ++++++++++++++++++-
2 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 9a050e1..fa74a73 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -53,7 +53,7 @@
compatible = "gpio-keys";

pinctrl-names = "default";
- pinctrl-0 = <&power_key_irq>;
+ pinctrl-0 = <&power_key_irq &lid_irq>;

power {
label = "Power";
@@ -61,6 +61,15 @@
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
};

memory {
@@ -658,6 +667,13 @@
samsung,pin-drv = <0>;
};

+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-4";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index e8fdda8..d603e73 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -52,7 +52,7 @@
compatible = "gpio-keys";

pinctrl-names = "default";
- pinctrl-0 = <&power_key_irq>;
+ pinctrl-0 = <&power_key_irq &lid_irq>;

power {
label = "Power";
@@ -60,6 +60,16 @@
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+
};

memory {
@@ -646,6 +656,13 @@
samsung,pin-drv = <0>;
};

+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-4";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
--
2.1.3


\
 
 \ /
  Last update: 2015-01-02 16:41    [W:0.404 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site