lkml.org 
[lkml]   [2015]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 2/5] Documentation: DT: Add bindings for Spreadtrum SoC Platform
From
Hi, Mark

>> +
>> +Required properties:
>> +- compatible: must be "sprd,sc9836-uart"
>> +- reg: offset and length of the register set for the device
>> +- interrupts: exactly one interrupt specifier
>> +- clocks: phandles to input clocks.
>
> The order and relevance of each should be specified. If you have
> multiple clocks I would strongly recommend you use clock-names to
> distinguish them.
>

Thank you for the recommendation.
but, since we haven't made the clock driver ready, for this initial
commit, we just let 4 UARTs share a single fixed 26 MHz clock source.
we'll do like you've recommended when we will submit the clock driver
in the future.

Best regards,
Chunyan



> Otherwise this looks fine.
>
> Mark.
>


\
 
 \ /
  Last update: 2015-01-16 14:21    [W:0.156 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site