Messages in this thread Patch in this message | | | Date | Fri, 16 Jan 2015 10:21:35 +0000 | From | Mark Rutland <> | Subject | Re: [PATCH v5 2/5] Documentation: DT: Add bindings for Spreadtrum SoC Platform |
| |
On Fri, Jan 16, 2015 at 10:00:08AM +0000, Chunyan Zhang wrote: > Adds Spreadtrum's prefix "sprd" to vendor-prefixes file. > Adds the devicetree binding documentations for Spreadtrum's sc9836-uart > and SC9836 SoC based on the Sharkl64 Platform which is a 64-bit SoC > Platform of Spreadtrum. > > Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> > Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> > --- > Documentation/devicetree/bindings/arm/sprd.txt | 11 +++++++++++ > .../devicetree/bindings/serial/sprd-uart.txt | 7 +++++++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > 3 files changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt > create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt > > diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt > new file mode 100644 > index 0000000..31a629d > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/sprd.txt > @@ -0,0 +1,11 @@ > +Spreadtrum SoC Platforms Device Tree Bindings > +---------------------------------------------------- > + > +Sharkl64 is a Spreadtrum's SoC Platform which is based > +on ARM 64-bit processor. > + > +SC9836 openphone board with SC9836 SoC based on the > +Sharkl64 Platform shall have the following properties. > + > +Required root node properties: > + - compatible = "sprd,sc9836-openphone", "sprd,sc9836"; > diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt > new file mode 100644 > index 0000000..2aff0f2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt > @@ -0,0 +1,7 @@ > +* Spreadtrum serial UART > + > +Required properties: > +- compatible: must be "sprd,sc9836-uart" > +- reg: offset and length of the register set for the device > +- interrupts: exactly one interrupt specifier > +- clocks: phandles to input clocks. The order and relevance of each should be specified. If you have multiple clocks I would strongly recommend you use clock-names to distinguish them.
Otherwise this looks fine.
Mark.
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index b1df0ad..0a8384f 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -153,6 +153,7 @@ snps Synopsys, Inc. > solidrun SolidRun > sony Sony Corporation > spansion Spansion Inc. > +sprd Spreadtrum Communications Inc. > st STMicroelectronics > ste ST-Ericsson > stericsson ST-Ericsson > -- > 1.7.9.5 > >
| |