lkml.org 
[lkml]   [2014]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] rtc: at91sam9: add DT support
Date
Hello,

This patch series adds DT support to the atmel at91sam9 RTC driver.

It also removes any machine specific inclusions to prepare the migration
to multi platform kernel support, and retain the slow clock to prevent
the CCF from disabling it at the end of boot.

Best Regards,

Boris

Changes since v1:
- remove non CCF specific case by adding the appropriate clk_lookup
entries in arch/arm/mach-at91/<soc-name>.c files

Boris BREZILLON (6):
rtc: at91sam9: remove references to mach specific headers
rtc: at91sam9: use standard readl/writel functions instead of raw
versions
rtc: at91sam9: add DT support
ARM: at91: add clk_lookup entry for RTT devices
rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
rtc: at91sam9: add DT bindings documentation

.../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 20 +++++++
arch/arm/mach-at91/at91sam9260.c | 2 +
arch/arm/mach-at91/at91sam9261.c | 2 +
arch/arm/mach-at91/at91sam9263.c | 4 ++
arch/arm/mach-at91/at91sam9g45.c | 2 +
arch/arm/mach-at91/at91sam9rl.c | 2 +
arch/arm/mach-at91/clock.c | 2 +-
arch/arm/mach-at91/clock.h | 1 +
drivers/rtc/rtc-at91sam9.c | 63 ++++++++++++++++++----
9 files changed, 87 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt

--
1.9.1



\
 
 \ /
  Last update: 2014-09-09 12:01    [W:0.635 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site