lkml.org 
[lkml]   [2014]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] ARM: dts: apq8064: Add SATA controller support.
Date
This patch adds AHCI based SATA controller support to APQ8064.
Tested on IFC6410 board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 8 +++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 36 ++++++++++++++++++++++++++++++
2 files changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index f221e9e..446dab9 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -40,6 +40,14 @@
};
};

+ sata_phy0: sata-phy@1b400000{
+ status = "okay";
+ };
+
+ sata0: sata@29000000 {
+ status = "okay";
+ };
+
/* OTG */
usb1_phy: phy@12500000 {
status = "okay";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 28643fb..44b6a0a 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -634,6 +634,42 @@
usb-phy = <&usb4_phy>;
};

+ sata_phy0: sata-phy@1b400000{
+ compatible = "qcom,apq8064-sata-phy";
+ status = "disabled";
+ reg = <0x1b400000 0x200>;
+ reg-names = "phy_mem";
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+ #phy-cells = <0>;
+ };
+
+ sata0: sata@29000000 {
+ compatible = "generic-ahci";
+ status = "disabled";
+ reg = <0x29000000 0x180>;
+ interrupts = <0 209 0>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_iface",
+ "iface",
+ "bus",
+ "rxoob",
+ "core_pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ target-supply = <&pm8921_s4>;
+ };
+
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
--
1.9.1


\
 
 \ /
  Last update: 2014-09-30 16:41    [W:0.387 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site