Messages in this thread | | | From | Octavian Purdila <> | Subject | [PATCH v6 0/4] mfd: add support for Diolan DLN-2 | Date | Thu, 25 Sep 2014 19:07:30 +0300 |
| |
This patch series adds support for Diolan USB-I2C/GPIO Master Adapter DLN-2. Details about device can be found here:
https://www.diolan.com/i2c/i2c_interface.html.
Changes since v5:
* MFD: use enum for handles, fix a couple of miss spells, rename a few fields for clarity, rework the disconnect mechanism, fix a couple of missing newlines in printks, use straight list_for_each instead of RCU versions in the update sides, used busnum << 8 | devnum as id in mfd_add_devices()
* GPIO: renamed pin_dir to output_enabled, disable GPIO if we failed getting the direction, don't set platform's driver owner field
* I2C: update Documentation/ABI for the added sysfs attributed, stored the port number in the dln2_i2c structure, used a temporary pointer to the tx/rx struct for readability, don't set platform's driver owner field
Daniel Baluta (1): gpio: add support for the Diolan DLN-2 USB GPIO driver
Laurentiu Palcu (1): i2c: add support for Diolan DLN-2 USB-I2C adapter
Octavian Purdila (2): mfd: add support for Diolan DLN-2 devices gpiolib: add irq_not_threaded flag to gpio_chip
.../ABI/testing/sysfs-bus-i2c-busses-dln2 | 5 + drivers/gpio/Kconfig | 12 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-dln2.c | 556 +++++++++++++++ drivers/gpio/gpiolib.c | 2 +- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-dln2.c | 378 +++++++++++ drivers/mfd/Kconfig | 9 + drivers/mfd/Makefile | 1 + drivers/mfd/dln2.c | 752 +++++++++++++++++++++ include/linux/gpio/driver.h | 3 + include/linux/mfd/dln2.h | 67 ++ 13 files changed, 1796 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-busses-dln2 create mode 100644 drivers/gpio/gpio-dln2.c create mode 100644 drivers/i2c/busses/i2c-dln2.c create mode 100644 drivers/mfd/dln2.c create mode 100644 include/linux/mfd/dln2.h
-- 1.9.1
| |