lkml.org 
[lkml]   [2014]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v2 00/16] Add ACPI _DSD and unified device properties support
On Tue, Sep 16, 2014 at 4:52 AM, Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
> This is a second revision of the patches first submitted here [1].
>
> The recent publication of the ACPI 5.1 specification [2] adds a reserved name
> for Device Specific Data (_DSD, Section 6.2.5). This mechanism allows for
> passing arbitrary hardware description data to the OS. The exact format of the
> _DSD data is specific to the UUID paired with it [3].
>
> An ACPI Device Properties UUID has been defined [4] to provide a format
> compatible with existing device tree schemas. The purpose for this was to
> allow for the reuse of the existing schemas and encourage the development
> of firmware agnostic device drivers.
>
> This series accomplishes the following (as well as some other dependencies):
>
> * Add _DSD support to the ACPI core
> This simply reads the UUID and the accompanying Package
>
> * Add ACPI Device Properties _DSD format support
> This understands the hierarchical key:value pair structure
> defined by the Device Properties UUID
>
> * Add a unified device properties API with ACPI and OF backends
> This provides for the firmware agnostic device properties
> Interface to be used by drivers
>
> * Provides 3 example drivers that were previously Device Tree aware that
> can now be used with either Device Tree or ACPI Device Properties. The
> drivers use "PRP0001" as their _HID which means that the match should be
> done using driver's .of_match_table instead.
>
> The patch series has been tested on Minnoboard and Minnowboard MAX and the
> relevant part of DSDTs are at the end of this cover letter.
>
> This series does not provide for a means to append to a system DSDT. That
> will ultimately be required to make the most effective use of the _DSD
> mechanism. Work is underway on that as a separate effort.
>
> Most important changes to the previous RFC version:
>
> * Added wrapper functions for most used property types
> * Return -EOVERFLOW in case integer would not fit to a type
> * Dropped dev_prop_ops
> * We now have dev_node_xxx() functions to access firmware node
> properties without dev pointer
> * The accessor function names try to be close to their corresponding of_*
> counterpart
> * Tried to have a bit better examples in the documentation patch
> * gpiolib got support for _DSD and also it now understand firmware node
> properties with dev_node_get_named_gpiod() that requests the GPIO
> properly.
> * Support for "PRP0001" _HID/_CID. This means that the match should be
> done using driver .of_match_table instead.
> * Add unified property support for at25 SPI eeprom driver as well.
>
> [1] https://lkml.org/lkml/2014/8/17/10
> [2] http://www.uefi.org/sites/default/files/resources/ACPI_5_1release.pdf
> [3] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
> [4] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
>
> Aaron Lu (2):
> input: gpio_keys_polled - Add support for GPIO descriptors
> input: gpio_keys_polled - Make use of device property API
>
> Max Eliaser (2):
> leds: leds-gpio: Make use of device property API
> leds: leds-gpio: Add ACPI probing support
>
> Mika Westerberg (11):
> ACPI: Add support for device specific properties
> ACPI: Allow drivers to match using Device Tree compatible property
> ACPI: Document ACPI device specific properties
> mfd: Add ACPI support
> gpio / ACPI: Add support for _DSD device properties
> gpio: Add support for unified device properties interface
> gpio: sch: Consolidate core and resume banks
> leds: leds-gpio: Add support for GPIO descriptors
> input: gpio_keys_polled - Add ACPI probing support
> misc: at25: Make use of device property API
> misc: at25: Add ACPI probing support
>
> Rafael J. Wysocki (1):
> Driver core: Unified device properties interface for platform firmware
>

I'm good with the LEDs change, please go ahead with my Ack
Acked-by: Bryan Wu <cooloney@gmail.com>

Thanks,
-Bryan


> Documentation/acpi/enumeration.txt | 27 ++
> Documentation/acpi/properties.txt | 410 +++++++++++++++++++++
> drivers/acpi/Makefile | 1 +
> drivers/acpi/internal.h | 6 +
> drivers/acpi/property.c | 584 ++++++++++++++++++++++++++++++
> drivers/acpi/scan.c | 93 ++++-
> drivers/base/Makefile | 2 +-
> drivers/base/property.c | 196 ++++++++++
> drivers/gpio/devres.c | 35 ++
> drivers/gpio/gpio-sch.c | 293 ++++++---------
> drivers/gpio/gpiolib-acpi.c | 78 +++-
> drivers/gpio/gpiolib.c | 85 ++++-
> drivers/gpio/gpiolib.h | 7 +-
> drivers/input/keyboard/gpio_keys_polled.c | 169 +++++----
> drivers/leds/leds-gpio.c | 188 +++++-----
> drivers/mfd/mfd-core.c | 40 ++
> drivers/misc/eeprom/at25.c | 41 +--
> drivers/of/base.c | 188 ++++++++++
> include/acpi/acpi_bus.h | 8 +
> include/linux/acpi.h | 90 ++++-
> include/linux/gpio/consumer.h | 7 +
> include/linux/gpio_keys.h | 3 +
> include/linux/leds.h | 1 +
> include/linux/mfd/core.h | 3 +
> include/linux/of.h | 37 ++
> include/linux/property.h | 193 ++++++++++
> 26 files changed, 2377 insertions(+), 408 deletions(-)
> create mode 100644 Documentation/acpi/properties.txt
> create mode 100644 drivers/acpi/property.c
> create mode 100644 drivers/base/property.c
> create mode 100644 include/linux/property.h
>
> DSDT modifications for Minnowboard (for leds-gpio.c and gpio_keys_polled.c)
> ---------------------------------------------------------------------------
>
> Scope (\_SB.PCI0.LPC)
> {
> Device (LEDS)
> {
> Name (_HID, "PRP0001")
>
> Name (_CRS, ResourceTemplate () {
> GpioIo (Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly,
> "\\_SB.PCI0.LPC", 0, ResourceConsumer) {10}
> GpioIo (Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly,
> "\\_SB.PCI0.LPC", 0, ResourceConsumer) {11}
> })
>
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"compatible", Package () {"gpio-leds"}},
> }
> })
>
> Device (LEDH)
> {
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"label", "Heartbeat"},
> Package () {"gpios", Package () {^^LEDS, 0, 0, 0}},
> Package () {"linux,default-trigger", "heartbeat"},
> Package () {"linux,default-state", "off"},
> Package () {"linux,retain-state-suspended", 1},
> }
> })
> }
>
> Device (LEDM)
> {
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"label", "MMC0 Activity"},
> Package () {"gpios", Package () {^^LEDS, 1, 0, 0}},
> Package () {"linux,default-trigger", "mmc0"},
> Package () {"linux,default-state", "off"},
> Package () {"linux,retain-state-suspended", 1},
> }
> })
> }
> }
>
> Device (BTNS)
> {
> Name (_HID, "PRP0001")
>
> Name (_CRS, ResourceTemplate () {
> GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
> "\\_SB.PCI0.LPC", 0, ResourceConsumer) {0, 1, 2, 3}
> })
>
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"compatible", Package () {"gpio-keys-polled"}},
> Package () {"poll-interval", 100},
> Package () {"autorepeat", 1}
> }
> })
>
> Device (BTN0)
> {
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"linux,code", 105},
> Package () {"linux,input-type", 1},
> Package () {"gpios", Package () {^^BTNS, 0, 0, 1}},
> }
> })
> }
>
> Device (BTN1)
> {
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"linux,code", 108},
> Package () {"linux,input-type", 1},
> Package () {"gpios", Package (4) {^^BTNS, 0, 1, 1}},
> }
> })
> }
>
> Device (BTN2)
> {
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"linux,code", 103},
> Package () {"linux,input-type", 1},
> Package () {"gpios", Package () {^^BTNS, 0, 2, 1}},
> }
> })
> }
>
> Device (BTN3)
> {
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package ()
> {
> Package () {"linux,code", 106},
> Package () {"linux,input-type", 1},
> Package () {"gpios", Package (4) {^^BTNS, 0, 3, 1}},
> }
> })
> }
> }
> }
>
> DSDT modifications for Minnowboard MAX (for at25.c)
> ---------------------------------------------------
>
> Scope (\_SB.SPI1)
> {
> Device (AT25)
> {
> Name (_HID, "PRP0001")
> Method (_CRS, 0, Serialized) {
> Name (UBUF, ResourceTemplate () {
> SpiSerialBus (0x0000, PolarityLow, FourWireMode, 0x08,
> ControllerInitiated, 0x007A1200, ClockPolarityLow,
> ClockPhaseSecond, "\\_SB.SPI1",
> 0x00, ResourceConsumer)
> })
> Return (UBUF)
> }
>
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package () {"compatible", Package () {"atmel,at25"}},
> Package () {"size", 1024},
> Package () {"pagesize", 32},
> Package () {"address-width", 16},
> }
> })
>
> Method (_STA, 0, NotSerialized)
> {
> Return (0xF)
> }
> }
> }
> --
> 2.1.0
>


\
 
 \ /
  Last update: 2014-09-23 02:01    [W:1.072 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site