lkml.org 
[lkml]   [2014]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] regulator: get voltage & duty table from dts for st-pwm
Date
get voltage & duty table from device tree might be better, other platforms can also use this
driver without any modify.
Tested on a rk3288 sdk board as logic voltage regulator.

Changes in v3:
Adviced by Doug Anderson
- Make Kconfig & Makefile alphabetical
- remove pwm_reg_period from pwm_regulator_data
- modify the calculation in pwm_regulator_set_voltage_sel
- add length validity check
Adviced by Doug Anderson
- update the Example

Changes in v2:
Adviced by Lee Jones
- rename the file
- remove all the prefix st_
- add depend on PWM in Kconfig
Adviced by Lee Jones
- rename the documentation
Adviced by Doug Anderson
- update the example
Adviced by Mark Rutland
- remove pwm-reg-period

Chris Zhong (2):
regulator: st-pwm: get voltage and duty table from dts
dt-bindings: add devicetree bindings for st-pwm regulator

.../bindings/regulator/pwm-regulator.txt | 29 +++
drivers/regulator/Kconfig | 13 +-
drivers/regulator/Makefile | 2 +-
drivers/regulator/pwm-regulator.c | 197 ++++++++++++++++++++
drivers/regulator/st-pwm.c | 190 -------------------
5 files changed, 234 insertions(+), 197 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.txt
create mode 100644 drivers/regulator/pwm-regulator.c
delete mode 100644 drivers/regulator/st-pwm.c

--
1.7.9.5



\
 
 \ /
  Last update: 2014-09-19 10:21    [W:0.042 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site