lkml.org 
[lkml]   [2014]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Intial support for voltage ADC
Date
Here is version 2.

Changes since v1:
- the review comments from Peter Meerwald and Hartmut Knaack are taken into
account
- the driver private sysfs attributes are dropped out.
- dt binding document is changed in the section of adc channel nodes - now the
adc channel number is represented by "reg" property.
- various cleanups found during preparation of version 2.

regards,
Stan

-------------------------------------------------------------------------------
Introduce inital support for VADC inside Qualcomm SPMI PMICs.
The vadc driver is reworked version of the same downstream
driver but now it is implemented through Industrial IO core.

Comments are welcome!

Stanimir Varbanov (2):
iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
DT: iio: vadc: document dt binding

.../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 123 +++
drivers/iio/adc/Kconfig | 11 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/qcom-spmi-vadc.c | 999 ++++++++++++++++++++
include/dt-bindings/iio/qcom,spmi-pmic-vadc.h | 119 +++
5 files changed, 1253 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
create mode 100644 drivers/iio/adc/qcom-spmi-vadc.c
create mode 100644 include/dt-bindings/iio/qcom,spmi-pmic-vadc.h



\
 
 \ /
  Last update: 2014-09-11 17:41    [W:0.155 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site