lkml.org 
[lkml]   [2014]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree
Date
This adds the soctherm thermal sensing and management unit to the
Tegra124 device tree along with the four thermal zones corresponding
to the four thermal sensors provided by soctherm.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 03916ef..a579fab 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>

#include "skeleton.dtsi"

@@ -756,6 +757,52 @@
status = "disabled";
};

+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+ };
+
+ mem {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+ };
+
+ gpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+ };
+
+ pllx {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+ };
+ };
+
+ soctherm: soctherm@0,700e2000 {
+ compatible = "nvidia,tegra124-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+ <&tegra_car TEGRA124_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+ #thermal-sensor-cells = <1>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--
1.8.1.5


\
 
 \ /
  Last update: 2014-08-06 12:41    [W:0.112 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site