lkml.org 
[lkml]   [2014]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/4] PWM changes for rk3288-evb
Date
These patches enable the PWM backlight for the rk3288-evb board.
There were tested by watching the backlight grow from off to max with
the following instructions:

cd /sys/class/backlight/backlight*/
for i in $(seq 255); do echo $i > brightness; sleep .01; done

The first patch switches PWM cells from 2 to 3 on rk3288. I think it
could land in Thierry's tree. This patch will break backward
compatibility for rk3288 until changes land handling PWM cells more
dynamically, but since there are no rk3288 boards shipping yet it
seems OK.

The second patch enables the proper IP. This will also break backward
compatibility, but again should be OK since there are no users. If
needed we could make the "grf" optional and assume any shipping boards
enabled the bit in their bootloader. I think this could land in
Thierry's tree with Heiko's ACK.

The 3rd and 4th patches are DTS ones. They could land in Heiko's tree
after the first two patches. They are based atop his current WIP 3.18
dts tree. Note that instantiating the PWM backlight will cause the
system to hang unless Heiko's (clk: rockchip: protect critical clocks
from getting disabled) <patchwork.kernel.org/patch/4725391> is landed.

There are no compile time or runtime dependencies between these
patches except that patch #3 needs to come before patch #4. ...and of
course the PWM won't work without all 4 patches.

Changes in v4:
- Updated comment not to add caveats about pwm_cells 3.
- rockchip_pwm_set_polarity() is now static.
- Separate pwm_ops for v1 and v2; no set_polarity() in v1.
- Added a blank line.
- Totally rewrote to go in the PWM driver.
- Reordered IP switch to be atop invert patch.
- Add rockchip,grf to pwm nodes.

Changes in v3:
- Don't store a private copy of polarity.
- Use true instead of 1.
- Cleanup init order with "has_invert".
- Fix space to tab in 2 places in DTS.
- Make sure PWM is upper case in prose.

Changes in v2:
- Check for failed ioremap()

Doug Anderson (4):
pwm: rockchip: Allow polarity invert on rk3288
ARM: rockchip: rk3288: Switch to use the proper PWM IP
ARM: dts: Add main PWM info to rk3288
ARM: dts: Enable PWM backlight on rk3288-evb

.../devicetree/bindings/pwm/pwm-rockchip.txt | 8 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 53 +++++++++++++
arch/arm/boot/dts/rk3288.dtsi | 72 ++++++++++++++++++
drivers/pwm/pwm-rockchip.c | 86 +++++++++++++++++++---
4 files changed, 208 insertions(+), 11 deletions(-)

--
2.1.0.rc2.206.gedb03e5



\
 
 \ /
  Last update: 2014-08-20 21:21    [W:0.031 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site