lkml.org 
[lkml]   [2014]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/12] ARM: sun8i: Enable pinctrl, i2c and mmc
Date
Hi Maxime,

This series enables all the controllers on sun8i that we already have
drivers for, excluding SPI as the tablet I have does not use it and
I cannot test it. If there's a way to test it without external connections
or devices please let me know.

This series is based on 3.17-rc1, however it should cleanly apply over
the sun8i-rtc patch you've queued.

The commit logs pretty much explain themselves. Note that PLL6 is not
implemented yet. I've some patches for the clocks that I will send later.


Cheers
ChenYu


Chen-Yu Tsai (12):
ARM: dts: sun8i: Add PIO controller node to the sun8i dtsi
ARM: dts: sun8i: Add R_PIO controller node to the dtsi
ARM: dts: sun8i: Add pinmux set for uart0
ARM: dts: sun8i: Add pin muxing option for R_UART
ARM: dts: sun8i: ippo-q8h: Add pinctrl properties for R_UART
ARM: dts: sun8i: Add mmc clocks to the dtsi
ARM: dts: sun8i: Add pin-muxing info for the mmc controllers
ARM: dts: sun8i: Add mmc controller nodes
ARM: dts: sun8i: Enable mmc controller on ippo-q8h-v5
ARM: dts: sun8i: Add pin-muxing info for the i2c controllers
ARM: dts: sun8i: Add i2c controller nodes
ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5

arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 41 +++++++
arch/arm/boot/dts/sun8i-a23.dtsi | 169 ++++++++++++++++++++++++++++
2 files changed, 210 insertions(+)

--
2.1.0



\
 
 \ /
  Last update: 2014-08-17 06:01    [W:0.075 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site