Messages in this thread | | | From | Chanwoo Choi <> | Subject | [RESEND PATCHv2 0/2] regulator: of: Add support for pasing regulator suspend state | Date | Wed, 09 Jul 2014 13:48:09 +0900 |
| |
The regulators would set different state/mode according to the kind of suspend state. So regulation_constraints structure has already regulator suspend state filed. This patch parse regulator suspend state from devicetree file.
For example:
ldoX_reg: LDOx { regulator-name = "VAP_XXX_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on;
regulator-initial-state = <3>; /* PM_SUSPEND_MEM */ regulator-state-standby { regulator-volt = <1200000>; };
regulator-state-mem { regulator-volt = <1200000>; regulator-off-in-suspend; };
regulator-state-disk { regulator-volt = <1200000>; regulator-on-in-suspend; }; };
Changes from v1: - Check whether regulator-initial-state and regulator-mode is correct or not - Add more detailed description about regulator-initial-state, regulator-mode and regulator-state-[standby/mem/disk] for devicetree bindings - Modify example of regulator suspend state in bindings documentation
Chanwoo Choi (2): regulator: of: Add support for parsing regulator_state for suspend state dt-bindings: regulator: Add regulator suspend state for PM state
.../devicetree/bindings/regulator/regulator.txt | 32 +++++++++ drivers/regulator/of_regulator.c | 76 +++++++++++++++++++++- 2 files changed, 106 insertions(+), 2 deletions(-)
-- 1.8.0
| |