lkml.org 
[lkml]   [2014]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 13/20] usb: host: xhci-plat: Add support for the Armada 375
Date
For the Armada 375 SoC which comes with an xhci controller. Currently
the quirk is the same that the Armada 380/385 one, but by introducing
a new compatible string it will allow to make the driver evolve
seamless.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
drivers/usb/host/xhci-plat.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index d12ba56f52da..09639962c0bb 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -152,6 +152,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
"marvell,armada-380-xhci"))
xhci_mvebu_mbus_init_quirk(pdev);

+ if (of_device_is_compatible(pdev->dev.of_node,
+ "marvell,armada-375-xhci"))
+ xhci_mvebu_mbus_init_quirk(pdev);
+
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
@@ -288,6 +292,7 @@ static const struct of_device_id usb_xhci_of_match[] = {
{ .compatible = "generic-xhci" },
{ .compatible = "xhci-platform" },
{ .compatible = "marvell,armada-380-xhci"},
+ { .compatible = "marvell,armada-375-xhci"},
{ },
};
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
--
1.8.1.2


\
 
 \ /
  Last update: 2014-05-06 03:41    [W:0.257 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site