lkml.org 
[lkml]   [2014]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: multi_v7_defconfig: Enable Zynq peripheral drivers
Date
A few drivers for Zynq peripherals made it into mainline recently.
Enable them in the defconfig. The following devices are enabled:
- Cadence Macb Ethernet controller
- Cadence I2C controller
- Arasan SDHCI

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
After quite a while I gave the defonfig a shot again. At first try it
directly booted my Zynq board to a usable login prompt, and with this
patch even some peripherals work out of the box.

Thanks,
Sören
---
arch/arm/configs/multi_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index d4e8a47a2f7c..763054810ccf 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -121,6 +121,7 @@ CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
+CONFIG_MACB=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
@@ -175,6 +176,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_CADENCE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_SIRF=y
@@ -272,6 +274,7 @@ CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_DOVE=y
--
1.9.3.1.ga73a6ad
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-05-27 20:01    [W:0.082 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site