lkml.org 
[lkml]   [2014]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
Date
From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

The current platform AHCI drier does not set the dma_mask correctly
for 64-bit DMA capable AHCI controller. This patch checks the AHCI
capability bit and set the dma_mask and coherent_dma_mask accordingly.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
---
drivers/ata/libahci_platform.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 7cb3a85..85049ef 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -368,6 +368,15 @@ int ahci_platform_init_host(struct platform_device *pdev,
ahci_init_controller(host);
ahci_print_info(host, "platform");

+ if (hpriv->cap & HOST_CAP_64) {
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+
+ rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (rc)
+ return rc;
+ }
+
return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
&ahci_platform_sht);
}
--
1.9.0


\
 
 \ /
  Last update: 2014-05-23 20:01    [W:0.949 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site