lkml.org 
[lkml]   [2014]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 45/71] clocksource: sh_mtu2: Allocate channels dynamically
Date
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

This prepares the driver for multi-channel support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
---
drivers/clocksource/sh_mtu2.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 94a5342..45e1e85 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -52,7 +52,8 @@ struct sh_mtu2_device {
void __iomem *mapbase;
struct clk *clk;

- struct sh_mtu2_channel channel;
+ struct sh_mtu2_channel *channels;
+ unsigned int num_channels;
};

static DEFINE_RAW_SPINLOCK(sh_mtu2_lock);
@@ -296,6 +297,7 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
{
struct sh_timer_config *cfg = pdev->dev.platform_data;
struct resource *res;
+ void __iomem *base;
int ret;
ret = -ENXIO;

@@ -315,16 +317,16 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
}

/*
- * Map memory, let channel.base point to our channel and mapbase to the
+ * Map memory, let base point to our channel and mapbase to the
* start/stop shared register.
*/
- mtu->channel.base = ioremap_nocache(res->start, resource_size(res));
- if (mtu->channel.base == NULL) {
+ base = ioremap_nocache(res->start, resource_size(res));
+ if (base == NULL) {
dev_err(&mtu->pdev->dev, "failed to remap I/O memory\n");
goto err0;
}

- mtu->mapbase = mtu->channel.base + cfg->channel_offset;
+ mtu->mapbase = base + cfg->channel_offset;

/* get hold of clock */
mtu->clk = clk_get(&mtu->pdev->dev, "mtu2_fck");
@@ -338,17 +340,28 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
if (ret < 0)
goto err2;

- ret = sh_mtu2_setup_channel(&mtu->channel, mtu);
+ mtu->channels = kzalloc(sizeof(*mtu->channels), GFP_KERNEL);
+ if (mtu->channels == NULL) {
+ ret = -ENOMEM;
+ goto err3;
+ }
+
+ mtu->num_channels = 1;
+
+ mtu->channels[0].base = base;
+
+ ret = sh_mtu2_setup_channel(&mtu->channels[0], mtu);
if (ret < 0)
goto err3;

return 0;
err3:
+ kfree(mtu->channels);
clk_unprepare(mtu->clk);
err2:
clk_put(mtu->clk);
err1:
- iounmap(mtu->channel.base);
+ iounmap(base);
err0:
return ret;
}
--
1.7.9.5


\
 
 \ /
  Last update: 2014-05-23 14:21    [W:0.242 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site