lkml.org 
[lkml]   [2014]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch v6 4/7] power: reset: add bindings for keystone reset driver

On 05/22/2014 09:03 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 05/22/2014 08:44 PM, Ivan Khoronzhuk wrote:
>
>> This node is intended to allow SoC reset in case of software reset
>> or appropriate watchdogs.
>
>> The Keystone SoCs can contain up to 4 watchdog timers to reset
>> SoC. Each watchdog timer event input is connected to the Reset Mux
>> block. The Reset Mux block can be configured to cause reset or not.
>
>> Additionally soft or hard reset can be configured.
>
>> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
>> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
>> ---
>> .../bindings/power/reset/keystone-reset.txt | 67
>> ++++++++++++++++++++++
>> 1 file changed, 67 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/power/reset/keystone-reset.txt
>
>> diff --git
>> a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
>> b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
>> new file mode 100644
>> index 0000000..a8a0c31
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
>> @@ -0,0 +1,67 @@
>> +* Device tree bindings for Texas Instruments keystone reset
>> +
>> +This node is intended to allow SoC reset in case of software reset
>> +of selected watchdogs.
>> +
>> +The Keystone SoCs can contain up to 4 watchdog timers to reset
>> +SoC. Each watchdog timer event input is connected to the Reset Mux
>> +block. The Reset Mux block can be configured to cause reset or not.
>> +
>> +Additionally soft or hard reset can be configured.
>> +
>> +Required properties:
>> +
>> +- compatible: ti,keystone-reset
>> +
>> +- ti,syscon-pll: phandle/offset pair. The phandle to syscon used to
>> + access pll controller registers and the offset to use
>> + reset control registers.
>> +
>> +- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
>> + access device state control registers and the offset
>> + in order to use mux block registers for all watchdogs.
>> +
>> +Optional properties:
>> +
>> +- ti,soft-reset: Boolean option indicating soft reset.
>> + By default hard reset is used.
>> +
>> +- ti,wdt_list: WDT list that can cause SoC reset. It's not
>> related
>
> Hm, why underscore in this property while hyphens are used in the
> others? Hyphen is generally preferrable in the device tree names...

Yes. You are right. I'll correct
Thanks!

>
>> + to WDT driver, it's just needed to enable a SoC related
>> + reset that's triggered by one of WDTs. The list is
>> + in format: <0>, <2>; It can be in random order and
>> + begins from 0 to 3, as keystone can contain up to 4 SoC
>> + reset watchdogs and can be in random order.
>
> WBR, Sergei
>

--
Regards,
Ivan Khoronzhuk



\
 
 \ /
  Last update: 2014-05-22 21:01    [W:0.083 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site