lkml.org 
[lkml]   [2014]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[Patch v6 3/7] mfd: ti-keystone-devctrl: add bindings for device state control
    Date
    The Keystone II devices have a set of registers that are used to control
    the status of its peripherals. This node is intended to allow access to
    this functionality.

    Reviewed-by: Arnd Bergmann <arnd@arndb.de>
    Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
    ---
    .../devicetree/bindings/mfd/ti-keystone-devctrl.txt | 19 +++++++++++++++++++
    1 file changed, 19 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt

    diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
    new file mode 100644
    index 0000000..20963c7
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
    @@ -0,0 +1,19 @@
    +* Device tree bindings for Texas Instruments keystone device state control
    +
    +The Keystone II devices have a set of registers that are used to control
    +the status of its peripherals. This node is intended to allow access to
    +this functionality.
    +
    +Required properties:
    +
    +- compatible: "ti,keystone-devctrl", "syscon"
    +
    +- reg: contains offset/length value for device state control
    + registers space.
    +
    +Example:
    +
    +devctrl: device-state-control@0x02620000 {
    + compatible = "ti,keystone-devctrl", "syscon";
    + reg = <0x02620000 0x1000>;
    +};
    --
    1.8.3.2


    \
     
     \ /
      Last update: 2014-05-22 20:21    [W:3.155 / U:1.388 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site