lkml.org 
[lkml]   [2014]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRuntime PM workqueue killing system performance with USB
Hi all,

Although I don't think this is a new issue, booting mainline on my vexpress
a9x4 (Quad ARMv7 Cortex-A9 board) with USB and PM_RUNTIME results in each
CPU being constantly 20-50% loaded. A bit of investigation shows that this
is due to the runtime-pm callbacks trying to autosuspend USB, despite this
being unsupported by the host-controller (isp1760, which doesn't have a
->bus_suspend callback). I've included a backtrace at the bottom of this mail.

Anyway, since ->bus_suspend is not implemented, hcd_bus_suspend returns
-ENOENT, which propagates back up to usb_runtime_suspend via usb_suspend_both.
At this point, we override the return value with -EBUSY:

drivers/usb/core/driver.c:usb_runtime_suspend:

/* The PM core reacts badly unless the return code is 0,
* -EAGAIN, or -EBUSY, so always return -EBUSY on an error.
*/
if (status != 0)
return -EBUSY;

This then tells the runtime PM code to try again:

drivers/base/power/runtime.c

if (retval == -EAGAIN || retval == -EBUSY) {
dev->power.runtime_error = 0;

/*
* If the callback routine failed an autosuspend, and
* if the last_busy time has been updated so that there
* is a new autosuspend expiration time, automatically
* reschedule another autosuspend.
*/
if ((rpmflags & RPM_AUTO) &&
pm_runtime_autosuspend_expiration(dev) != 0)
goto repeat;

Consequently, I see a kworker thread on each CPU consuming a significant
amount of the system resources. Worse, if I enable something like kmemleak
(which adds more work to the failed suspend operation), I end up failing
to boot entirely (NFS bombs out).

Reverting db7c7c0aeef5 ("usb: Always return 0 or -EBUSY to the runtime
PM core.") fixes this for me, but the commit log suggests that will break
lsusb. That patch has also been in for three and a half years...

Any ideas on how to fix this properly? In what ways does the PM core react
badly to -ENOENT?

Cheers,

Will

--->8

[ 161.385424] CPU: 0 PID: 51 Comm: kworker/0:1 Not tainted 3.15.0-rc5 #2
[ 161.405009] Workqueue: pm pm_runtime_work
[ 161.417019] task: ed0bec00 ti: ed470000 task.ti: ed470000
[ 161.433195] PC is at kmemleak_free+0x8/0x4c
[ 161.445737] LR is at kfree+0xbc/0x154
[ 161.456699] pc : [<c05be7e0>] lr : [<c00ecc14>] psr: 400f0013
[ 161.456699] sp : ed471c58 ip : 0000001c fp : ed39adc0
[ 161.491098] r10: 00000000 r9 : ed59a300 r8 : c09df324
[ 161.506743] r7 : c03e7960 r6 : ee59b340 r5 : ed59a300 r4 : ed001f00
[ 161.526294] r3 : 0000f0e0 r2 : edff0000 r1 : ed59a300 r0 : ed59a300
[ 161.545848] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 161.567743] Control: 10c5387d Table: 8d5e004a DAC: 00000015
[ 161.584955] CPU: 0 PID: 51 Comm: kworker/0:1 Not tainted 3.15.0-rc5 #2
[ 161.604512] Workqueue: pm pm_runtime_work
[ 161.616572] [<c0015e90>] (unwind_backtrace) from [<c0011b14>] (show_stack+0x10/0x14)
[ 161.639794] [<c0011b14>] (show_stack) from [<c05c1444>] (dump_stack+0x88/0x98)
[ 161.661449] [<c05c1444>] (dump_stack) from [<c02b89a8>] (sysrq_handle_showallcpus+0x5c/0x64)
[ 161.686744] [<c02b89a8>] (sysrq_handle_showallcpus) from [<c02b8fe4>] (__handle_sysrq+0x128/0x17c)
[ 161.713600] [<c02b8fe4>] (__handle_sysrq) from [<c02d2124>] (pl011_fifo_to_tty+0x174/0x1c4)
[ 161.738631] [<c02d2124>] (pl011_fifo_to_tty) from [<c02d32f4>] (pl011_int+0x298/0x5a8)
[ 161.762362] [<c02d32f4>] (pl011_int) from [<c0086ac8>] (handle_irq_event_percpu+0x78/0x134)
[ 161.787393] [<c0086ac8>] (handle_irq_event_percpu) from [<c0086bc4>] (handle_irq_event+0x40/0x60)
[ 161.813991] [<c0086bc4>] (handle_irq_event) from [<c0089c30>] (handle_fasteoi_irq+0xa8/0x1a8)
[ 161.839562] [<c0089c30>] (handle_fasteoi_irq) from [<c00861c4>] (generic_handle_irq+0x2c/0x3c)
[ 161.865377] [<c00861c4>] (generic_handle_irq) from [<c000ef40>] (handle_IRQ+0x40/0x90)
[ 161.889105] [<c000ef40>] (handle_IRQ) from [<c00087e8>] (gic_handle_irq+0x2c/0x5c)
[ 161.911788] [<c00087e8>] (gic_handle_irq) from [<c0012680>] (__irq_svc+0x40/0x50)
[ 161.934204] Exception stack(0xed471c10 to 0xed471c58)
[ 161.949333] 1c00: ed59a300 ed59a300 edff0000 0000f0e0
[ 161.973840] 1c20: ed001f00 ed59a300 ee59b340 c03e7960 c09df324 ed59a300 00000000 ed39adc0
[ 161.998345] 1c40: 0000001c ed471c58 c00ecc14 c05be7e0 400f0013 ffffffff
[ 162.018168] [<c0012680>] (__irq_svc) from [<c05be7e0>] (kmemleak_free+0x8/0x4c)
[ 162.040082] [<c05be7e0>] (kmemleak_free) from [<c00ecc14>] (kfree+0xbc/0x154)
[ 162.061490] [<c00ecc14>] (kfree) from [<c03e7960>] (usb_hcd_submit_urb+0x2d4/0x804)
[ 162.084447] [<c03e7960>] (usb_hcd_submit_urb) from [<c03e94b4>] (usb_start_wait_urb+0x4c/0xbc)
[ 162.110264] [<c03e94b4>] (usb_start_wait_urb) from [<c03e95c4>] (usb_control_msg+0xa0/0xd0)
[ 162.135298] [<c03e95c4>] (usb_control_msg) from [<c03dfb10>] (hub_port_status+0x74/0xfc)
[ 162.159548] [<c03dfb10>] (hub_port_status) from [<c03e139c>] (hub_activate+0x164/0x500)
[ 162.183537] [<c03e139c>] (hub_activate) from [<c03e179c>] (hub_resume+0x14/0x1c)
[ 162.205709] [<c03e179c>] (hub_resume) from [<c03ec474>] (usb_resume_interface.isra.6+0xe8/0x118)
[ 162.232041] [<c03ec474>] (usb_resume_interface.isra.6) from [<c03ec560>] (usb_suspend_both+0xbc/0x19c)
[ 162.259938] [<c03ec560>] (usb_suspend_both) from [<c03ed418>] (usb_runtime_suspend+0x28/0x58)
[ 162.285497] [<c03ed418>] (usb_runtime_suspend) from [<c032888c>] (__rpm_callback+0x38/0x84)
[ 162.310530] [<c032888c>] (__rpm_callback) from [<c03288f8>] (rpm_callback+0x20/0x74)
[ 162.333739] [<c03288f8>] (rpm_callback) from [<c0328d54>] (rpm_suspend+0xd0/0x4e8)
[ 162.356428] [<c0328d54>] (rpm_suspend) from [<c032a048>] (__pm_runtime_suspend+0x70/0x98)
[ 162.380939] [<c032a048>] (__pm_runtime_suspend) from [<c03ed480>] (usb_runtime_idle+0x24/0x2c)
[ 162.406750] [<c03ed480>] (usb_runtime_idle) from [<c032888c>] (__rpm_callback+0x38/0x84)
[ 162.431001] [<c032888c>] (__rpm_callback) from [<c0329320>] (rpm_idle+0xf8/0x19c)
[ 162.453428] [<c0329320>] (rpm_idle) from [<c032a16c>] (pm_runtime_work+0x90/0xa0)
[ 162.475860] [<c032a16c>] (pm_runtime_work) from [<c005d674>] (process_one_work+0x108/0x374)
[ 162.500891] [<c005d674>] (process_one_work) from [<c005e384>] (worker_thread+0x130/0x3e4)
[ 162.525412] [<c005e384>] (worker_thread) from [<c0063a30>] (kthread+0xd8/0xf0)
[ 162.547063] [<c0063a30>] (kthread) from [<c000e6f8>] (ret_from_fork+0x14/0x3c)



\
 
 \ /
  Last update: 2014-05-22 12:41    [W:0.150 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site