lkml.org 
[lkml]   [2014]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drivers: i2c: i2c-st: Update i2c timings
Date
The i2c timing values specified in the driver are the minimun
values defined in the I2C specifications.
The I2C specification does not specify any default or maximum values.

Some I2C devices are out of spec, and might not work properly with minimum
values.

This patch adds a 10% margin on all the timings.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
drivers/i2c/busses/i2c-st.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 8720161..09142f1 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -210,21 +210,21 @@ static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
static struct st_i2c_timings i2c_timings[] = {
[I2C_MODE_STANDARD] = {
.rate = 100000,
- .rep_start_hold = 4000,
- .rep_start_setup = 4700,
- .start_hold = 4000,
- .data_setup_time = 250,
- .stop_setup_time = 4000,
- .bus_free_time = 4700,
+ .rep_start_hold = 4400,
+ .rep_start_setup = 5170,
+ .start_hold = 4400,
+ .data_setup_time = 275,
+ .stop_setup_time = 4400,
+ .bus_free_time = 5170,
},
[I2C_MODE_FAST] = {
.rate = 400000,
- .rep_start_hold = 600,
- .rep_start_setup = 600,
- .start_hold = 600,
- .data_setup_time = 100,
- .stop_setup_time = 600,
- .bus_free_time = 1300,
+ .rep_start_hold = 660,
+ .rep_start_setup = 660,
+ .start_hold = 660,
+ .data_setup_time = 110,
+ .stop_setup_time = 660,
+ .bus_free_time = 1430,
},
};

--
1.9.1


\
 
 \ /
  Last update: 2014-05-16 18:21    [W:0.468 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site