lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ath10k: fix rssi reporting.
Date
From: Ben Greear <greearb@candelatech.com>

When the driver cannot provide proper rssi, mark
status with RX_FLAG_NO_SIGNAL_VAL so that stack
properly ignores it.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---

Patch is against my tree, hopefully will apply OK against upstream
but have not tested that yet.

drivers/net/wireless/ath/ath10k/htt_rx.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 0c83ffb..d8ec8dd 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1216,11 +1216,12 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
mpdu_ranges = htt_rx_ind_get_mpdu_ranges(rx);

/* Fill this once, while this is per-ppdu */
- if (rx->ppdu.info0 & HTT_RX_INDICATION_INFO0_START_VALID) {
- memset(rx_status, 0, sizeof(*rx_status));
+ memset(rx_status, 0, sizeof(*rx_status));
+ if (rx->ppdu.info0 & HTT_RX_INDICATION_INFO0_START_VALID)
rx_status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
rx->ppdu.combined_rssi;
- }
+ else
+ rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;

if (rx->ppdu.info0 & HTT_RX_INDICATION_INFO0_END_VALID) {
/* TSF available only in 32-bit */
--
1.7.11.7


\
 
 \ /
  Last update: 2014-05-15 21:01    [W:0.027 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site