lkml.org 
[lkml]   [2014]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/6] phy: add a driver for the Berlin SATA PHY
Date
The Berlin SoC has a two SATA ports. Add a PHY driver to handle them.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
drivers/phy/Kconfig | 5 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-berlin-sata.c | 179 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+)
create mode 100644 drivers/phy/phy-berlin-sata.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 4906c27fa3bd..b31b1986fda4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,6 +15,11 @@ config GENERIC_PHY
phy users can obtain reference to the PHY. All the users of this
framework should select this config.

+config PHY_BERLIN_SATA
+ bool
+ depends on ARCH_BERLIN && OF
+ select GENERIC_PHY
+
config PHY_EXYNOS_MIPI_VIDEO
tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
depends on HAS_IOMEM
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 7728518572a4..40278706ac1b 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,6 +3,7 @@
#

obj-$(CONFIG_GENERIC_PHY) += phy-core.o
+obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c
new file mode 100644
index 000000000000..f20f5ece1a7f
--- /dev/null
+++ b/drivers/phy/phy-berlin-sata.c
@@ -0,0 +1,179 @@
+/*
+ * Marvell Berlin SATA PHY driver
+ *
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#define HOST_VSA_ADDR 0x0
+#define HOST_VSA_DATA 0x4
+
+#define CONTROL_REGISTER 0x0
+#define MBUS_SIZE_CONTROL 0x4
+
+#define POWER_DOWN_SATA0 BIT(6)
+#define POWER_DOWN_SATA1 BIT(14)
+#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16)
+#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19)
+
+#define BERLIN_SATA_PHY_NB 2
+
+#define to_berlin_sata_phy_priv(desc) \
+ container_of((desc), struct priv, phys[(desc)->index])
+
+struct phy_desc {
+ struct phy *phy;
+ u32 val;
+ unsigned index;
+};
+
+struct priv {
+ void __iomem *base;
+ spinlock_t lock;
+ struct phy_desc phys[BERLIN_SATA_PHY_NB];
+};
+
+static int phy_berlin_sata_power_on(struct phy *phy)
+{
+ struct phy_desc *desc = phy_get_drvdata(phy);
+ struct priv *priv = to_berlin_sata_phy_priv(desc);
+ u32 regval;
+
+ spin_lock(&priv->lock);
+
+ /* Power up PHY */
+ writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
+ regval = readl(priv->base + HOST_VSA_DATA);
+ regval &= ~(desc->val);
+ writel(regval, priv->base + HOST_VSA_DATA);
+
+ /* Configure MBus */
+ writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
+ regval = readl(priv->base + HOST_VSA_DATA);
+ regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128;
+ writel(regval, priv->base + HOST_VSA_DATA);
+
+ spin_unlock(&priv->lock);
+
+ return 0;
+}
+
+static int phy_berlin_sata_power_off(struct phy *phy)
+{
+ struct phy_desc *desc = phy_get_drvdata(phy);
+ struct priv *priv = to_berlin_sata_phy_priv(desc);
+ u32 regval;
+
+ spin_lock(&priv->lock);
+
+ /* Power down PHY */
+ writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
+ regval = readl(priv->base + HOST_VSA_DATA);
+ regval |= desc->val;
+ writel(regval, priv->base + HOST_VSA_DATA);
+
+ spin_unlock(&priv->lock);
+
+ return 0;
+}
+
+static struct phy *berlin_sata_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct priv *priv = dev_get_drvdata(dev);
+
+ if (WARN_ON(args->args[0] >= BERLIN_SATA_PHY_NB))
+ return ERR_PTR(-ENODEV);
+
+ return priv->phys[args->args[0]].phy;
+}
+
+static struct phy_ops phy_berlin_sata_ops = {
+ .power_on = phy_berlin_sata_power_on,
+ .power_off = phy_berlin_sata_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct phy_desc desc[] = {
+ { .val = POWER_DOWN_SATA0 },
+ { .val = POWER_DOWN_SATA1 },
+ { },
+};
+
+static int phy_berlin_sata_probe(struct platform_device *pdev)
+{
+ struct phy *phy;
+ struct phy_provider *phy_provider;
+ struct priv *priv;
+ struct resource *res;
+ int i;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ phy = devm_phy_create(&pdev->dev, &phy_berlin_sata_ops, NULL);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ dev_set_drvdata(&pdev->dev, priv);
+ spin_lock_init(&priv->lock);
+
+ for (i = 0; i < BERLIN_SATA_PHY_NB; i++) {
+ struct phy *phy = devm_phy_create(&pdev->dev,
+ &phy_berlin_sata_ops, NULL);
+ if (IS_ERR(phy)) {
+ dev_err(&pdev->dev, "failed to create PHY %d\n", i);
+ return PTR_ERR(phy);
+ }
+
+ priv->phys[i].phy = phy;
+ priv->phys[i].val = desc[i].val;
+ priv->phys[i].index = i;
+ phy_set_drvdata(phy, &priv->phys[i]);
+
+ /* Make sure the PHY is off */
+ phy_berlin_sata_power_off(phy);
+ }
+
+ phy_provider = devm_of_phy_provider_register(&pdev->dev,
+ berlin_sata_phy_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+}
+
+static const struct of_device_id phy_berlin_sata_of_match[] = {
+ { .compatible = "marvell,berlin-sata-phy" },
+ { },
+};
+
+static struct platform_driver phy_berlin_sata_driver = {
+ .probe = phy_berlin_sata_probe,
+ .driver = {
+ .name = "phy-berlin-sata",
+ .owner = THIS_MODULE,
+ .of_match_table = phy_berlin_sata_of_match,
+ },
+};
+module_platform_driver(phy_berlin_sata_driver);
+
+MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
+MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
+MODULE_LICENSE("GPL");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-05-12 14:21    [W:0.102 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site