lkml.org 
[lkml]   [2014]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/6] Documentation: bindings: add the Berlin SATA PHY
Date
The Berlin SATA PHY drives the PHY related to the SATA interface and
allows to power up/down each PHY independently. Add the corresponding
documentation.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
Documentation/devicetree/bindings/phy/berlin-sata-phy.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
new file mode 100644
index 000000000000..6d1cf5e11cfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
@@ -0,0 +1,15 @@
+Berlin SATA PHY
+---------------
+
+Required properties:
+- compatible: "marvell,berlin-sata-phy"
+- #phy-cells: from the generic PHY bindings, must be 1
+- reg: address and length of the register
+
+Example:
+ sata_phy0: phy@f7e900a0 {
+ compatible = "marvell,berlin-sata-phy";
+ reg = <0xf7e900a0 0x10>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-05-12 13:21    [W:0.062 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site