lkml.org 
[lkml]   [2014]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 20/20] usb: phy: msm: Use usb_add_phy_dev() to register device
Date
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

There could be more than one USB2.0 PHY's on the platform.
This will allow all of them to be registered successfully.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
drivers/usb/phy/phy-msm-usb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 8e7956e..9dc7918 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1663,6 +1663,7 @@ static int msm_otg_probe(struct platform_device *pdev)
phy->init = msm_phy_init;
phy->set_power = msm_otg_set_power;
phy->notify_disconnect = msm_phy_notify_disconnect;
+ phy->type = USB_PHY_TYPE_USB2;

phy->io_ops = &msm_otg_io_ops;

@@ -1672,7 +1673,7 @@ static int msm_otg_probe(struct platform_device *pdev)

msm_usb_reset(phy);

- ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2);
+ ret = usb_add_phy_dev(&motg->phy);
if (ret) {
dev_err(&pdev->dev, "usb_add_phy failed\n");
goto disable_ldo;
--
1.8.3.2


\
 
 \ /
  Last update: 2014-04-28 16:41    [W:0.033 / U:1.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site