lkml.org 
[lkml]   [2014]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] regulator: s5m8767: Use same binding for external control as in s2mps11
Date
Change the binding for regulators external control to the same used in
s2mps11 driver to be consistent.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt | 4 ++--
drivers/regulator/s5m8767.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
index d290988ed975..558c80345ef0 100644
--- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -76,7 +76,7 @@ except these properties:
1 - on in normal mode
2 - low power mode
3 - suspend mode
- - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
+ - samsung,ext-control-gpios: (optional) GPIO specifier for one
GPIO controlling this regulator (enable/disable); This is
valid only for buck9.

@@ -157,7 +157,7 @@ Example:
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
op_mode = <3>; /* Standby Mode */
- s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
};
};
};
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 92f19a005dc3..dbfd98b04a77 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -534,7 +534,7 @@ static void s5m8767_pmic_dt_parse_ext_control_gpio(struct sec_pmic_dev *iodev,
struct device_node *reg_np)
{
rdata->ext_control_gpio = of_get_named_gpio(reg_np,
- "s5m8767,pmic-ext-control-gpios", 0);
+ "samsung,ext-control-gpios", 0);
if (!gpio_is_valid(rdata->ext_control_gpio))
rdata->ext_control_gpio = 0;
}
--
1.8.3.2


\
 
 \ /
  Last update: 2014-04-14 17:21    [W:0.109 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site