lkml.org 
[lkml]   [2014]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] thermal: samsung: Only update available threshold limits
Date
Currently the threshold limits are updated in 2 stages, once for all
software trigger levels and again for hardware trip point.

While updating the software trigger levels, it overwrites the threshold
limit for hardware trip point thereby forcing the Exynos core to issue
an emergency shutdown.

Updating only the required fields in threshold register fixes this issue.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
Based on v3.15-rc1.

drivers/thermal/samsung/exynos_tmu.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 0d96a51..ffccc89 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -225,6 +225,8 @@ skip_calib_data:
trigger_levs++;
}

+ rising_threshold = readl(data->base + reg->threshold_th0);
+
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
@@ -249,6 +251,7 @@ skip_calib_data:
ret = threshold_code;
goto out;
}
+ rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
if (pdata->threshold_falling) {
threshold_code = temp_to_code(data,
@@ -281,6 +284,7 @@ skip_calib_data:
}
if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
/* 1-4 level to be assigned in th0 reg */
+ rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
writel(rising_threshold,
data->base + reg->threshold_th0);
--
1.7.9.5


\
 
 \ /
  Last update: 2014-04-14 08:21    [W:2.056 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site