lkml.org 
[lkml]   [2014]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpio: bcm-kona: Add irq_set_wake method
Date
If a consumer of a GPIO-based IRQ identifies itself as wanting to
have the capability to wake up the system through that interrupt,
update the flags to keep that interrupt enabled in suspend.

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
---
drivers/gpio/gpio-bcm-kona.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 3f6b33c..b0e0971 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
+#include <linux/interrupt.h>

#define BCM_GPIO_PASSWD 0x00a5a501
#define GPIO_PER_BANK 32
@@ -340,6 +341,23 @@ static void bcm_kona_gpio_irq_ack(struct irq_data *d)
spin_unlock_irqrestore(&kona_gpio->lock, flags);
}

+#ifdef CONFIG_SUSPEND
+static int bcm_kona_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+
+ struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);
+
+ if (on)
+ desc->action->flags |= IRQF_NO_SUSPEND;
+ else
+ desc->action->flags &= ~IRQF_NO_SUSPEND;
+
+ return 0;
+}
+#else
+#define bcm_kona_gpio_irq_set_wake NULL
+#endif
+
static void bcm_kona_gpio_irq_mask(struct irq_data *d)
{
struct bcm_kona_gpio *kona_gpio;
@@ -494,6 +512,7 @@ static struct irq_chip bcm_gpio_irq_chip = {
.irq_set_type = bcm_kona_gpio_irq_set_type,
.irq_request_resources = bcm_kona_gpio_irq_reqres,
.irq_release_resources = bcm_kona_gpio_irq_relres,
+ .irq_set_wake = bcm_kona_gpio_irq_set_wake,
};

static struct __initconst of_device_id bcm_kona_gpio_of_match[] = {
--
1.7.9.5


\
 
 \ /
  Last update: 2014-04-11 02:41    [W:0.056 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site