Messages in this thread | | | Date | Thu, 6 Mar 2014 21:11:54 +0530 | From | Kishon Vijay Abraham I <> | Subject | Re: [PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings |
| |
Felipe,
On Thursday 06 March 2014 08:08 PM, Roger Quadros wrote: > The dra7-usb2 and am437-usb2 bindings have not yet been used. > Change them to be more elegant. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++--
Here too.. Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Regards Kishon > drivers/phy/phy-omap-control.c | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt > index 5c5b1b0..28e674b 100644 > --- a/Documentation/devicetree/bindings/phy/ti-phy.txt > +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt > @@ -9,9 +9,9 @@ Required properties: > e.g. USB2_PHY on OMAP5. > "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control > e.g. USB3 PHY and SATA PHY on OMAP5. > - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on > + "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on > DRA7 platform. > - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on > + "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on > AM437 platform. > - reg : Address and length of the register set for the device. It contains > the address of "otghs_control" for control-phy-otghs or "power" register > diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c > index 17fc200..a7e2d7f 100644 > --- a/drivers/phy/phy-omap-control.c > +++ b/drivers/phy/phy-omap-control.c > @@ -228,11 +228,11 @@ static const struct of_device_id omap_control_phy_id_table[] = { > .data = &pipe3_data, > }, > { > - .compatible = "ti,control-phy-dra7usb2", > + .compatible = "ti,control-phy-dra7-usb2", > .data = &dra7usb2_data, > }, > { > - .compatible = "ti,control-phy-am437usb2", > + .compatible = "ti,control-phy-am437-usb2", > .data = &am437usb2_data, > }, > {}, >
| |