Messages in this thread | | | Date | Tue, 18 Mar 2014 08:52:25 +0100 | From | Pavel Machek <> | Subject | 3.14-rc6: softlockup at kswapd |
| |
Hi!
Machine should have been idle overnight, but I think something killed chromium-browser -- so it may ran out of memory.
Anyway, dmesg below.
Any ideas? Pavel
PS: That warn_on from wifi on every boot is getting boring :-(.
Initializing cgroup subsys cpu Linux version 3.14.0-rc6+ (pavel@duo) (gcc version 4.4.5 (Debian 4.4.5-8) ) #330 SMP Sat Mar 15 10:55:26 CET 2014 Disabled fast string operations e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000007f6cffff] usable BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6defff] ACPI data BIOS-e820: [mem 0x000000007f6df000-0x000000007f6fffff] ACPI NVS BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.4 present. DMI: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DBFFF uncachable DC000-DFFFF write-back E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped: [mem 0x00000000-0x053fffff] Base memory trampoline at [c009b000] 9b000 size 16384 init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 4k BRK [0x050e1000, 0x050e1fff] PGTABLE init_memory_mapping: [mem 0x30000000-0x36ffffff] [mem 0x30000000-0x36ffffff] page 4k BRK [0x050e2000, 0x050e2fff] PGTABLE BRK [0x050e3000, 0x050e3fff] PGTABLE BRK [0x050e4000, 0x050e4fff] PGTABLE BRK [0x050e5000, 0x050e5fff] PGTABLE BRK [0x050e6000, 0x050e6fff] PGTABLE init_memory_mapping: [mem 0x00100000-0x2fffffff] [mem 0x00100000-0x2fffffff] page 4k init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k ACPI: RSDP 000f67c0 000024 (v02 LENOVO) ACPI: XSDT 7f6d191c 000084 (v01 LENOVO TP-7B 00002190 LTP 00000000) ACPI: FACP 7f6d1a00 0000F4 (v03 LENOVO TP-7B 00002190 LNVO 00000001) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20131218/tbfadt-603) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20131218/tbfadt-603) ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20131218/tbfadt-634) ACPI: DSDT 7f6d1d90 00CFB9 (v01 LENOVO TP-7B 00002190 MSFT 0100000E) ACPI: FACS 7f6f4000 000040 ACPI: SSDT 7f6d1bb4 0001DC (v01 LENOVO TP-7B 00002190 MSFT 0100000E) ACPI: ECDT 7f6ded49 000052 (v01 LENOVO TP-7B 00002190 LNVO 00000001) ACPI: TCPA 7f6ded9b 000032 (v02 LENOVO TP-7B 00002190 LNVO 00000001) ACPI: APIC 7f6dedcd 000068 (v01 LENOVO TP-7B 00002190 LNVO 00000001) ACPI: MCFG 7f6dee35 00003C (v01 LENOVO TP-7B 00002190 LNVO 00000001) ACPI: HPET 7f6dee71 000038 (v01 LENOVO TP-7B 00002190 LNVO 00000001) ACPI: BOOT 7f6defd8 000028 (v01 LENOVO TP-7B 00002190 LTP 00000001) ACPI: SSDT 7f6f2645 00025F (v01 LENOVO TP-7B 00002190 INTL 20050513) ACPI: SSDT 7f6f28a4 0000A6 (v01 LENOVO TP-7B 00002190 INTL 20050513) ACPI: SSDT 7f6f294a 0004F7 (v01 LENOVO TP-7B 00002190 INTL 20050513) ACPI: SSDT 7f6f2e41 0001D8 (v01 LENOVO TP-7B 00002190 INTL 20050513) ACPI: Local APIC address 0xfee00000 1150MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone ranges: DMA [mem 0x00001000-0x00ffffff] Normal [mem 0x01000000-0x377fdfff] HighMem [mem 0x377fe000-0x7f6cffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7f6cffff] On node 0 totalpages: 521838 free_area_init_node: node 0, pgdat c4b30200, node_mem_map f614f024 DMA zone: 36 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3998 pages, LIFO batch:0 Normal zone: 1962 pages used for memmap Normal zone: 223230 pages, LIFO batch:31 HighMem zone: 2590 pages used for memmap HighMem zone: 294610 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] e820: [mem 0x80000000-0xefffffff] available for PCI devices setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @f77c2000 s29248 r0 d24000 u53248 pcpu-alloc: s29248 r0 d24000 u53248 alloc=13*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519840 Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-good/arch/x86/boot/bzImage root=/dev/sda3 resume=/dev/sda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps acpi_sleep=s3_bios,s3_mode no_console_suspend i915.modeset=1 video=inteldrmfb:mode=1024x768 fbcon=scrollback:64k PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007f6d0) Initializing Movable for node 0 (00000000:00000000) Memory: 2049808K/2087352K available (8073K kernel code, 512K rwdata, 2972K rodata, 492K init, 5104K bss, 37544K reserved, 1178440K highmem) virtual kernel memory layout: fixmap : 0xffe6e000 - 0xfffff000 (1604 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc4b4c000 - 0xc4bc7000 ( 492 kB) .data : 0xc47e28a3 - 0xc4b4b040 (3489 kB) .text : 0xc4000000 - 0xc47e28a3 (8074 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS:2304 nr_irqs:512 16 CPU 0 irqstacks, hard=f5c1a000 soft=f5c1c000 ACPI: Core revision 20131218 ACPI: All ACPI Tables successfully acquired Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3551 kB per task-struct memory footprint: 1152 bytes ODEBUG: 9 of 9 active objects replaced hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 1828.705 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.41 BogoMIPS (lpj=7314820) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0 tlb_flushall_shift: 6 debug: unmapping init [mem 0xc4bc7000-0xc4bcefff] Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz (fam: 06, model: 0e, stepping: 08) Performance Events: Core events, core PMU driver. ... version: 1 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. CPU 1 irqstacks, hard=f5ddc000 soft=f5dde000 x86: Booting SMP configuration: .... node #0, CPUs: #1 Initializing CPU#1 Disabled fast string operations TSC synchronization [CPU#0 -> CPU#1]: Measured 579975 cycles TSC warp between CPUs, turning off TSC clock. tsc: Marking TSC unstable due to check_tsc_sync_source failed x86: Booted up 1 node, 2 CPUs smpboot: Total of 2 processors activated (7314.82 BogoMIPS) devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f6fffff] (135168 bytes) NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI : EC: EC description table is found, configuring boot EC ACPI: SSDT 7f6f1d26 000240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 7f6f1feb 00065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) ACPI: SSDT 7f6f1c5e 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 7f6f1f66 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xee100000-0xee17ffff] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: reg 0x1c: [mem 0xee200000-0xee23ffff] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000 pci 0000:00:02.1: reg 0x10: [mem 0xee180000-0xee1fffff] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xee240000-0xee243fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: System wakeup disabled by ACPI pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: System wakeup disabled by ACPI pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: System wakeup disabled by ACPI pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: System wakeup disabled by ACPI pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: System wakeup disabled by ACPI pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f] pci 0000:00:1d.0: System wakeup disabled by ACPI pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f] pci 0000:00:1d.1: System wakeup disabled by ACPI pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f] pci 0000:00:1d.2: System wakeup disabled by ACPI pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 0x10: [mem 0xee444000-0xee4443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: System wakeup disabled by ACPI pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 pci 0000:00:1e.0: System wakeup disabled by ACPI pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601 pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7] pci 0000:00:1f.2: reg 0x14: [io 0x18c4-0x18c7] pci 0000:00:1f.2: reg 0x18: [io 0x18c8-0x18cf] pci 0000:00:1f.2: reg 0x1c: [io 0x18c0-0x18c3] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf] pci 0000:00:1f.2: reg 0x24: [mem 0xee444400-0xee4447ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000 pci 0000:02:00.0: reg 0x10: [mem 0xee000000-0xee01ffff] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000 pci 0000:03:00.0: reg 0x10: [mem 0xedf00000-0xedf00fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] acpiphp: Slot [1] registered pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700 pci 0000:15:00.0: reg 0x10: [mem 0xe4300000-0xe4300fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.1: [1180:0552] type 00 class 0x0c0010 pci 0000:15:00.1: reg 0x10: [mem 0xe4301000-0xe43017ff] pci 0000:15:00.1: PME# supported from D0 D3hot D3cold pci 0000:15:00.2: [1180:0822] type 00 class 0x080500 pci 0000:15:00.2: reg 0x10: [mem 0xe4301800-0xe43018ff] pci 0000:15:00.2: supports D1 D2 pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed40fff] (subtractive decode) pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18]) pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17 pci_bus 0000:00: on NUMA node 0 ACPI: Enabled 2 GPEs in block 00 to 1F ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x7f6d0000-0x7fffffff] Bluetooth: Core ver 2.18 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at net/wireless/reg.c:481 regulatory_init+0x92/0xff() db.txt is empty, you should update it... Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc6+ #330 Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011 000001e1 f5d21e44 c47dc0eb c4a7c290 f5d21e74 c4037f9a c4a85d40 f5d21ea0 00000001 c4a7c290 000001e1 c4b82a9f c4b82a9f 00000000 c4b82936 f5d21ec8 f5d21e8c c403803e 00000009 f5d21e84 c4a85d40 f5d21ea0 f5d21ecc c4b82a9f Call Trace: [<c47dc0eb>] dump_stack+0x41/0x52 [<c4037f9a>] warn_slowpath_common+0x7a/0xa0 [<c4b82a9f>] ? regulatory_init+0x92/0xff [<c4b82a9f>] ? regulatory_init+0x92/0xff [<c4b82936>] ? cache_initialize+0x86/0x86 [<c403803e>] warn_slowpath_fmt+0x2e/0x30 [<c4b82a9f>] regulatory_init+0x92/0xff [<c4b82995>] cfg80211_init+0x5f/0xd7 [<c4b81ff3>] ? bt_init+0x6e/0x98 [<c40003fa>] do_one_initcall+0xca/0x180 [<c4b4c663>] ? repair_env_string+0x15/0x5b [<c40514c1>] ? parse_args+0x1f1/0x440 [<c4b4c5a9>] kernel_init_freeable+0xec/0x191 [<c4b4c64e>] ? kernel_init_freeable+0x191/0x191 [<c47d893b>] kernel_init+0xb/0xe0 [<c47e13b7>] ret_from_kernel_thread+0x1b/0x28 [<c47d8930>] ? rest_init+0xb0/0xb0 ---[ end trace fd1b107111d0460f ]--- cfg80211: Calling CRDA to update world regulatory domain Switched to clocksource hpet pnp: PnP ACPI init ACPI: bus type PNP registered pnp 00:00: unknown resource type 10 in _CRS pnp 00:00: can't evaluate _CRS: 1 system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:01: [io 0x164e-0x164f] has been reserved system 00:01: [io 0x1000-0x107f] could not be reserved system 00:01: [io 0x1180-0x11bf] has been reserved system 00:01: [io 0x0800-0x080f] has been reserved system 00:01: [io 0x15e0-0x15ef] has been reserved system 00:01: [io 0x1600-0x165f] could not be reserved system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) pnp 00:0b: [dma 3] pnp 00:0b: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active) pnp 00:0c: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) pnp: PnP ACPI: found 13 devices ACPI: bus type PNP unregistered pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] pci 0000:15:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:15:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:15:00.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:15:00.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:15:00.0: BAR 9: assigned [mem 0xe0000000-0xe3ffffff pref] pci 0000:15:00.0: BAR 10: assigned [mem 0x84000000-0x87ffffff] pci 0000:15:00.0: BAR 7: assigned [io 0x9000-0x90ff] pci 0000:15:00.0: BAR 8: assigned [io 0x9400-0x94ff] pci 0000:15:00.0: CardBus bridge to [bus 16-17] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff] pci 0000:00:1e.0: PCI bridge to [bus 15-18] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed40fff] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:15: resource 9 [mem 0x80000000-0xfebfffff] pci_bus 0000:15: resource 10 [mem 0xfed40000-0xfed40fff] pci_bus 0000:16: resource 0 [io 0x9000-0x90ff] pci_bus 0000:16: resource 1 [io 0x9400-0x94ff] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref] pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device PCI: CLS mismatch (64 != 32), using 64 bytes Simple Boot Flag at 0x35 set to 0x1 futex hash table entries: 512 (order: 3, 32768 bytes) bounce pool size: 64 pages NTFS driver 2.1.30 [Flags: R/W]. fuse init (API version 7.22) msgmni has been set to 1701 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed intel_idle: does not run on family 6 model 14 ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) acpi device:02: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (72 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (71 C) GHES: HEST is not enabled! ERST DBG: ERST support is disabled. ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT0] (battery present) Error: Driver 'battery' is already registered, aborting... Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A lp: driver loaded but no devices found Non-volatile memory driver v1.3 intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 [drm] Memory usable by graphics device = 256M [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 102x42 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device i915 0000:00:02.0: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 usbcore: registered new interface driver udl parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). loop: module loaded nbd: registered device at major 43 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata_piix 0000:00:1f.1: version 2.13 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata6: port disabled--ignoring tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode ata5.00: ATAPI: UJDA765 DVD/CDRW, 1.70, max UDMA/33 e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:25:19:04 e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003 ata5.00: configured for UDMA/33 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds iwl3945: Copyright(c) 2003-2011 Intel Corporation iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver r815x usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver cdc_ncm pci 0000:00:1e.0: enabling device (0005 -> 0007) yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:201c] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA UJDA765 DVD/CDRW 1.70 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c38, PCI irq 16 yenta_cardbus 0000:15:00.0: Socket status: 30000006 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: cache line size of 64 is not supported ehci-pci 0000:00:1d.7: irq 19, io mem 0xee444000 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.14.0-rc6+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.14.0-rc6+ uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.14.0-rc6+ uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.14.0-rc6+ uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.14.0-rc6+ uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp usbcore: registered new interface driver usb-storage usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 usbcore: registered new interface driver ti_usb_3410_5052 usbserial: USB Serial support registered for TI USB 3410 1 port adapter usbserial: USB Serial support registered for TI USB 5052 2 port adapter driver ftdi-elan usbcore: registered new interface driver ftdi-elan i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input5 rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized usbcore: registered new interface driver btusb lguest: mapped switcher at ffe68000 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18) sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver thinkpad_acpi: ThinkPad ACPI Extras v0.25 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7BETD8WW (2.19 ), EC 7BHT40WW-1.13 thinkpad_acpi: Lenovo ThinkPad X60, model 17097HU thinkpad_acpi: detected a 8-level brightness capable ThinkPad thinkpad_acpi: ACPI backlight control delay disabled thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. usb 1-6: new high-speed USB device number 2 using ehci-pci thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled thinkpad_acpi: Standard ACPI backlight interface available, not loading native one thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 hda_intel: probe_mask set to 0x1 for device 17aa:2010 usbcore: registered new interface driver snd-usb-audio nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered NET: Registered protocol family 17 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) hp_outs=0 (0x0/0x0/0x0/0x0/0x0) mono: mono_out=0x0 inputs: Mic=0x8 CD=0x19 Using IPI No-Shortcut mode rtc_cmos 00:06: setting system clock to 2014-03-15 10:00:25 UTC (1394877625) PM: Checking hibernation image partition /dev/sda1 PM: Hibernation image partition 8:1 present PM: Looking for hibernation image. usb 1-6: New USB device found, idVendor=17ef, idProduct=1000 usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. ALSA device list: #0: HDA Intel at 0xee240000 irq 17 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:3. devtmpfs: mounted debug: unmapping init [mem 0xc4b4c000-0xc4bc6fff] Write protecting the kernel text: 8076k Write protecting the kernel read-only data: 2976k usb 5-1: new full-speed USB device number 2 using uhci_hcd usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: BCM2045B usb 5-1: Manufacturer: Broadcom Corp usb 5-2: new full-speed USB device number 3 using uhci_hcd usb 5-2: New USB device found, idVendor=0483, idProduct=2016 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Biometric Coprocessor usb 5-2: Manufacturer: STMicroelectronics udev[1753]: starting version 164 random: nonblocking pool is initialized usb 1-6.1: new low-speed USB device number 5 using ehci-pci usb 1-6.1: New USB device found, idVendor=04f2, idProduct=0111 usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.1: Product: USB Keyboard usb 1-6.1: Manufacturer: Chicony input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/0003:04F2:0111.0001/input/input9 hid-generic 0003:04F2:0111.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.7-6.1/input0 input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.1/0003:04F2:0111.0002/input/input10 hid-generic 0003:04F2:0111.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.7-6.1/input1 usb 1-6.2: new low-speed USB device number 6 using ehci-pci usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.2: Product: USB Optical Mouse usb 1-6.2: Manufacturer: Logitech input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.0/0003:046D:C05A.0003/input/input11 hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.7-6.2/input0 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff Adding 779148k swap on /dev/sda1. Priority:-1 extents:1 across:779148k EXT3-fs (sda3): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (sda2): using internal journal EXT3-fs (sda2): mounted filesystem with ordered data mode EXT3-fs (sda4): error: can't find ext3 filesystem on dev sda4. input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 sshd (3350): /proc/3350/oom_adj is deprecated, please use /proc/3350/oom_score_adj instead. wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:33:13:01:31:45 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x1 status=0 aid=3) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:33:13:01:31:45 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. ieee80211 phy0: wlan0: No probe response from AP 00:33:13:01:31:45 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:33:13:01:31:45 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:33:13:01:31:45 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated ata5.00: disabled ata5.00: detaching (SCSI 4:0:0:0) acpi PNP0401:00: Cannot transition to non-D0 state from D3 ACPI: \_SB_.GDCK: undocking usb 1-6: USB disconnect, device number 2 usb 1-6.1: USB disconnect, device number 5 usb 1-6.2: USB disconnect, device number 6 usb 5-1: USB disconnect, device number 2 wlan0: deauthenticating from 00:33:13:01:31:45 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.006 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done. PM: Entering mem sleep sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0a: disabled serial 00:09: disabled serial 00:09: System wakeup disabled by ACPI PM: suspend of devices complete after 414.023 msecs PM: suspend devices took 0.416 seconds PM: late suspend of devices complete after 1.971 msecs pcieport 0000:00:1c.0: System wakeup enabled by ACPI ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI PM: noirq suspend of devices complete after 51.815 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... smpboot: CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x1 Initializing CPU#1 Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI PM: noirq resume of devices complete after 110.143 msecs PM: early resume of devices complete after 1.407 msecs usb usb2: root hub lost power or was reset usb usb3: root hub lost power or was reset usb usb4: root hub lost power or was reset usb usb5: root hub lost power or was reset pcieport 0000:00:1c.0: System wakeup disabled by ACPI sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. ata6: port disabled--ignoring serial 00:09: activated parport_pc 00:0a: activated usb 5-2: reset full-speed USB device number 3 using uhci_hcd ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Starting disk thinkpad_acpi: ACPI backlight control delay disabled PM: resume of devices complete after 2938.098 msecs PM: resume devices took 2.940 seconds PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. usb 5-1: new full-speed USB device number 4 using uhci_hcd usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: BCM2045B usb 5-1: Manufacturer: Broadcom Corp wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated ACPI: \_SB_.GDCK: docking usb 1-6: new high-speed USB device number 8 using ehci-pci usb 1-6: New USB device found, idVendor=17ef, idProduct=1000 usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected usb 1-6.1: new low-speed USB device number 9 using ehci-pci usb 1-6.1: New USB device found, idVendor=04f2, idProduct=0111 usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.1: Product: USB Keyboard usb 1-6.1: Manufacturer: Chicony input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/0003:04F2:0111.0004/input/input13 hid-generic 0003:04F2:0111.0004: input,hidraw0: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.7-6.1/input0 input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.1/0003:04F2:0111.0005/input/input14 hid-generic 0003:04F2:0111.0005: input,hiddev0,hidraw1: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.7-6.1/input1 usb 1-6.2: new low-speed USB device number 10 using ehci-pci usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.2: Product: USB Optical Mouse usb 1-6.2: Manufacturer: Logitech input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.0/0003:046D:C05A.0006/input/input15 hid-generic 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.7-6.2/input0 ata5: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen ata5: ACPI event ata5: soft resetting link ata5.00: ATAPI: UJDA765 DVD/CDRW, 1.70, max UDMA/33 ata5.00: configured for UDMA/33 ata5: EH complete scsi 4:0:0:0: CD-ROM MATSHITA UJDA765 DVD/CDRW 1.70 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 usb 1-5: new high-speed USB device number 11 using ehci-pci usb 1-5: New USB device found, idVendor=0421, idProduct=01c7 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: N900 (Storage Mode) usb 1-5: Manufacturer: Nokia usb 1-5: SerialNumber: 372041756775 usb-storage 1-5:1.0: USB Mass Storage device detected scsi6 : usb-storage 1-5:1.0 scsi 6:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk scsi 6:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 6:0:0:1: Attached scsi generic sg3 type 0 sd 6:0:0:1: [sdc] Attached SCSI removable disk usb 1-5: USB disconnect, device number 11 ieee80211 phy0: wlan0: No probe response from AP 00:33:13:01:31:45 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated usb 1-5: new high-speed USB device number 12 using ehci-pci usb 1-5: New USB device found, idVendor=0421, idProduct=01c7 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: N900 (Storage Mode) usb 1-5: Manufacturer: Nokia usb 1-5: SerialNumber: 372041756775 usb-storage 1-5:1.0: USB Mass Storage device detected scsi7 : usb-storage 1-5:1.0 scsi 7:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 7:0:0:0: Attached scsi generic sg2 type 0 sd 7:0:0:0: [sdb] Attached SCSI removable disk scsi 7:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 7:0:0:1: Attached scsi generic sg3 type 0 sd 7:0:0:1: [sdc] Attached SCSI removable disk usb 1-5: USB disconnect, device number 12 usb 1-6.4: new high-speed USB device number 13 using ehci-pci usb 1-6.4: New USB device found, idVendor=0421, idProduct=01c7 usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6.4: Product: N900 (Storage Mode) usb 1-6.4: Manufacturer: Nokia usb 1-6.4: SerialNumber: 372041756775 usb-storage 1-6.4:1.0: USB Mass Storage device detected scsi8 : usb-storage 1-6.4:1.0 scsi 8:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 8:0:0:0: Attached scsi generic sg2 type 0 sd 8:0:0:0: [sdb] Attached SCSI removable disk scsi 8:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 8:0:0:1: Attached scsi generic sg3 type 0 sd 8:0:0:1: [sdc] Attached SCSI removable disk usb 1-6.3: new full-speed USB device number 14 using ehci-pci usb 1-6.3: New USB device found, idVendor=054c, idProduct=042f usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.3: Product: Navigation Controller usb 1-6.3: Manufacturer: Sony sony 0003:054C:042F.0007: Fixing up Sony Sixaxis report descriptor input: Sony Navigation Controller as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0/0003:054C:042F.0007/input/input16 sony 0003:054C:042F.0007: input,hiddev0,hidraw3: USB HID v1.11 Joystick [Sony Navigation Controller] on usb-0000:00:1d.7-6.3/input0 usb 1-6.4: USB disconnect, device number 13 usb 1-6.4: new high-speed USB device number 15 using ehci-pci usb 1-6.4: New USB device found, idVendor=0421, idProduct=0105 usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 usb 1-6.4: Product: Nokia N900 (Update mode) usb 1-6.4: Manufacturer: Nokia usb 1-6.4: SerialNumber: 4D554D363434323537 usb 1-6.4: USB disconnect, device number 15 usb 1-6.4: new high-speed USB device number 16 using ehci-pci usb 1-6.4: New USB device found, idVendor=0421, idProduct=01c7 usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6.4: Product: N900 (Storage Mode) usb 1-6.4: Manufacturer: Nokia usb 1-6.4: SerialNumber: 372041756775 usb-storage 1-6.4:1.0: USB Mass Storage device detected scsi9 : usb-storage 1-6.4:1.0 scsi 9:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 9:0:0:0: Attached scsi generic sg2 type 0 sd 9:0:0:0: [sdb] Attached SCSI removable disk scsi 9:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 9:0:0:1: Attached scsi generic sg3 type 0 sd 9:0:0:1: [sdc] Attached SCSI removable disk usb 5-1: USB disconnect, device number 4 wlan0: deauthenticating from 00:33:13:01:31:45 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.132 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done. PM: Entering mem sleep sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0a: disabled serial 00:09: disabled serial 00:09: System wakeup disabled by ACPI PM: suspend of devices complete after 405.897 msecs PM: suspend devices took 0.408 seconds PM: late suspend of devices complete after 2.063 msecs pcieport 0000:00:1c.0: System wakeup enabled by ACPI ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI PM: noirq suspend of devices complete after 51.800 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... smpboot: CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x1 Initializing CPU#1 Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI PM: noirq resume of devices complete after 109.836 msecs PM: early resume of devices complete after 1.516 msecs usb usb2: root hub lost power or was reset usb usb3: root hub lost power or was reset usb usb4: root hub lost power or was reset usb usb5: root hub lost power or was reset pcieport 0000:00:1c.0: System wakeup disabled by ACPI sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. ata6: port disabled--ignoring serial 00:09: activated parport_pc 00:0a: activated usb 5-2: reset full-speed USB device number 3 using uhci_hcd ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata5.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded ata5.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded ata5.00: configured for UDMA/33 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Starting disk thinkpad_acpi: ACPI backlight control delay disabled PM: resume of devices complete after 2936.692 msecs PM: resume devices took 2.940 seconds PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. usb 5-1: new full-speed USB device number 5 using uhci_hcd usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: BCM2045B usb 5-1: Manufacturer: Broadcom Corp wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated ata5.00: disabled acpi PNP0401:00: Cannot transition to non-D0 state from D3 ACPI: \_SB_.GDCK: undocking ata5.00: detaching (SCSI 4:0:0:0) usb 1-6: USB disconnect, device number 8 usb 1-6.1: USB disconnect, device number 9 usb 1-6.2: USB disconnect, device number 10 usb 1-6.3: USB disconnect, device number 14 usb 1-6.4: USB disconnect, device number 16 wlan0: deauthenticating from 00:33:13:01:31:45 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:33:13:01:31:45 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:33:13:01:31:45 wlan0: send auth to 00:33:13:01:31:45 (try 1/3) wlan0: authenticated wlan0: associate with 00:33:13:01:31:45 (try 1/3) wlan0: RX AssocResp from 00:33:13:01:31:45 (capab=0x401 status=0 aid=1) wlan0: associated ACPI: \_SB_.GDCK: docking usb 1-6: new high-speed USB device number 18 using ehci-pci usb 1-6: New USB device found, idVendor=17ef, idProduct=1000 usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected usb 1-6.1: new low-speed USB device number 19 using ehci-pci usb 1-6.1: New USB device found, idVendor=04f2, idProduct=0111 usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.1: Product: USB Keyboard usb 1-6.1: Manufacturer: Chicony input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/0003:04F2:0111.0008/input/input17 hid-generic 0003:04F2:0111.0008: input,hidraw0: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.7-6.1/input0 input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.1/0003:04F2:0111.0009/input/input18 hid-generic 0003:04F2:0111.0009: input,hiddev0,hidraw1: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.7-6.1/input1 usb 1-6.2: new low-speed USB device number 20 using ehci-pci usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.2: Product: USB Optical Mouse usb 1-6.2: Manufacturer: Logitech input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.0/0003:046D:C05A.000A/input/input19 hid-generic 0003:046D:C05A.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.7-6.2/input0 ata5: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen ata5: ACPI event ata5: soft resetting link usb 1-6.3: new full-speed USB device number 21 using ehci-pci ata5.00: ATAPI: UJDA765 DVD/CDRW, 1.70, max UDMA/33 ata5.00: configured for UDMA/33 ata5: EH complete scsi 4:0:0:0: CD-ROM MATSHITA UJDA765 DVD/CDRW 1.70 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 usb 1-6.3: New USB device found, idVendor=054c, idProduct=042f usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.3: Product: Navigation Controller usb 1-6.3: Manufacturer: Sony sony 0003:054C:042F.000B: Fixing up Sony Sixaxis report descriptor input: Sony Navigation Controller as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0/0003:054C:042F.000B/input/input20 sony 0003:054C:042F.000B: input,hiddev0,hidraw3: USB HID v1.11 Joystick [Sony Navigation Controller] on usb-0000:00:1d.7-6.3/input0 usb 1-6.4: new high-speed USB device number 22 using ehci-pci usb 1-6.4: New USB device found, idVendor=0421, idProduct=01c7 usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6.4: Product: N900 (Storage Mode) usb 1-6.4: Manufacturer: Nokia usb 1-6.4: SerialNumber: 372041756775 usb-storage 1-6.4:1.0: USB Mass Storage device detected scsi10 : usb-storage 1-6.4:1.0 scsi 10:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 10:0:0:0: Attached scsi generic sg2 type 0 scsi 10:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 10:0:0:1: Attached scsi generic sg3 type 0 sd 10:0:0:0: [sdb] Attached SCSI removable disk sd 10:0:0:1: [sdc] Attached SCSI removable disk usb 1-6.3: USB disconnect, device number 21 usb 1-6.3: new full-speed USB device number 23 using ehci-pci usb 1-6.3: New USB device found, idVendor=054c, idProduct=03d5 usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.3: Product: Motion Controller usb 1-6.3: Manufacturer: Sony Computer Entertainment input: Sony Computer Entertainment Motion Controller as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0/0003:054C:03D5.000C/input/input21 hid-generic 0003:054C:03D5.000C: input,hiddev0,hidraw3: USB HID v1.10 Gamepad [Sony Computer Entertainment Motion Controller] on usb-0000:00:1d.7-6.3/input0 usb 1-6.3: USB disconnect, device number 23 usb 1-6.3: new full-speed USB device number 24 using ehci-pci usb 1-6.3: New USB device found, idVendor=054c, idProduct=03d5 usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.3: Product: Motion Controller usb 1-6.3: Manufacturer: Sony Computer Entertainment input: Sony Computer Entertainment Motion Controller as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0/0003:054C:03D5.000D/input/input22 hid-generic 0003:054C:03D5.000D: input,hiddev0,hidraw3: USB HID v1.10 Gamepad [Sony Computer Entertainment Motion Controller] on usb-0000:00:1d.7-6.3/input0 usb 1-6.3: USB disconnect, device number 24 usb 1-6.4: USB disconnect, device number 22 usb 1-6.4: new high-speed USB device number 25 using ehci-pci usb 1-6.4: New USB device found, idVendor=0421, idProduct=01c7 usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6.4: Product: N900 (Storage Mode) usb 1-6.4: Manufacturer: Nokia usb 1-6.4: SerialNumber: 372041756775 usb-storage 1-6.4:1.0: USB Mass Storage device detected scsi11 : usb-storage 1-6.4:1.0 scsi 11:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 11:0:0:0: Attached scsi generic sg2 type 0 scsi 11:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 sd 11:0:0:0: [sdb] Attached SCSI removable disk sd 11:0:0:1: Attached scsi generic sg3 type 0 sd 11:0:0:1: [sdc] Attached SCSI removable disk [sched_delayed] sched: RT throttling activated BUG: soft lockup - CPU#0 stuck for 22s! [kswapd0:745] Modules linked in: CPU: 0 PID: 745 Comm: kswapd0 Tainted: G W 3.14.0-rc6+ #330 Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011 task: f5f785a0 ti: f5c1a000 task.ti: f509c000 EIP: 0060:[<c4075b93>] EFLAGS: 00000246 CPU: 0 EIP is at lock_release+0xa3/0x1e0 EAX: f5f785a0 EBX: f5f785a0 ECX: 00000000 EDX: 00000000 ESI: 000882a7 EDI: 00000000 EBP: f509ddd8 ESP: f509ddb4 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: b38ab000 CR3: 04bd2000 CR4: 00000710 Stack: c40d188b 00000000 f5c205c0 0000013a 00000001 00000246 f5c205c0 00000000 f509df08 f509dde4 c47e0906 f5c205c0 f509ddf4 c40d1899 f5d17800 0000013a f509de0c c40ef33a 00000000 00000000 00000020 f5d17ba4 f509de4c c40c519e Call Trace: [<c40d188b>] ? list_lru_count_node+0x1b/0x60 [<c47e0906>] _raw_spin_unlock+0x16/0x20 [<c40d1899>] list_lru_count_node+0x29/0x60 [<c40ef33a>] super_cache_count+0x5a/0xc0 [<c40c519e>] shrink_slab_node+0x2e/0x1d0 [<c40c536a>] ? shrink_slab+0x2a/0xf0 [<c40c5411>] shrink_slab+0xd1/0xf0 [<c40c5912>] kswapd+0x4e2/0x930 [<c40534d4>] kthread+0xb4/0xd0 [<c40c5430>] ? shrink_slab+0xf0/0xf0 [<c4050000>] ? alloc_pid+0x2e0/0x380 [<c47e13b7>] ret_from_kernel_thread+0x1b/0x28 [<c4053420>] ? __init_kthread_worker+0x60/0x60 Code: 00 89 f1 89 fa 89 d8 e8 4c fc ff ff 85 c0 74 07 89 d8 e8 d1 dc ff ff 64 a1 2c 07 bc c4 c7 80 08 05 00 00 00 00 00 00 ff 75 f0 9d <8b> 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 9c 58 f6 c4 02 74 92 e8 INFO: task kjournald:2237 blocked for more than 120 seconds. Tainted: G W 3.14.0-rc6+ #330 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D f5f5e5a0 0 2237 2 0x00000000 f119de28 00000046 00000000 f5f5e5a0 f5f5e5d0 00000000 00000000 7397771c 00009c09 f119c008 c4bbf000 7397771c 00009c09 f5f5e5a0 00000000 f5f5eaac 00000298 00000000 00000000 00000000 00000000 f5f5e5a0 00000000 00000000 Call Trace: [<c47dd0ce>] schedule+0x1e/0x60 [<c41a6781>] journal_commit_transaction+0x141/0x10d0 [<c406d4d0>] ? bit_waitqueue+0x50/0x50 [<c4041e92>] ? try_to_del_timer_sync+0x52/0x70 [<c4041f39>] ? del_timer_sync+0x89/0xa0 [<c41aa270>] kjournald+0xd0/0x240 [<c406d4d0>] ? bit_waitqueue+0x50/0x50 [<c40534d4>] kthread+0xb4/0xd0 [<c41aa1a0>] ? commit_timeout+0x10/0x10 [<c4050000>] ? alloc_pid+0x2e0/0x380 [<c47e13b7>] ret_from_kernel_thread+0x1b/0x28 [<c4053420>] ? __init_kthread_worker+0x60/0x60 no locks held by kjournald/2237. INFO: task Chrome_DBThread:11478 blocked for more than 120 seconds. Tainted: G W 3.14.0-rc6+ #330 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Chrome_DBThread D c4074e6e 0 11478 1 0x00000000 f27e1cb8 00000046 f27e1c70 c4074e6e effb0fb0 00000000 00000001 2071de58 00009c08 f27e0008 c4bbf000 20733c97 00009c08 d54165a0 00000373 00584371 00000000 086e2373 0000000b d54165a0 086e2373 0000000b f27e1cac 00000046 Call Trace: [<c4074e6e>] ? __lock_acquire+0x3ae/0xc80 [<c406d81e>] ? prepare_to_wait_exclusive+0x1e/0x70 [<c47dd0ce>] schedule+0x1e/0x60 [<c47dd15a>] io_schedule+0x4a/0x70 [<c4116368>] sleep_on_buffer+0x8/0x10 [<c47dd398>] __wait_on_bit_lock+0x48/0x90 [<c4116360>] ? unmap_underlying_metadata+0x40/0x40 [<c4116360>] ? unmap_underlying_metadata+0x40/0x40 [<c47dd486>] out_of_line_wait_on_bit_lock+0xa6/0xc0 [<c406d570>] ? wake_atomic_t_function+0x50/0x50 [<c411750e>] __lock_buffer+0x2e/0x30 [<c41a5b31>] do_get_write_access+0x381/0x410 [<c414d931>] ? __ext3_get_inode_loc+0xb1/0x2e0 [<c41a5be3>] journal_get_write_access+0x23/0x40 [<c415b46f>] __ext3_journal_get_write_access+0x1f/0x50 [<c414dbe1>] ext3_reserve_inode_write+0x61/0x80 [<c414dc1d>] ext3_mark_inode_dirty+0x1d/0x40 [<c414dd56>] ext3_dirty_inode+0x46/0x80 [<c410f7a9>] __mark_inode_dirty+0x29/0x1d0 [<c4103041>] update_time+0x71/0xb0 [<c41030f3>] file_update_time+0x73/0xb0 [<c40b75d1>] __generic_file_aio_write+0x141/0x550 [<c40b7a32>] generic_file_aio_write+0x52/0xf0 [<c40ec0b4>] do_sync_write+0x64/0xa0 [<c40ecf6e>] vfs_write+0x9e/0x190 [<c40ec050>] ? do_sync_readv_writev+0x90/0x90 [<c40ed151>] SyS_write+0x51/0x90 [<c47e143f>] sysenter_do_call+0x12/0x31 [<c47e0000>] ? down_read_failed+0x40/0x160 3 locks held by Chrome_DBThread/11478: #0: (sb_writers#3){......}, at: [<c40ed04a>] vfs_write+0x17a/0x190 #1: (&sb->s_type->i_mutex_key#10){......}, at: [<c40b7a20>] generic_file_aio_write+0x40/0xf0 #2: (jbd_handle){......}, at: [<c41a61d8>] start_this_handle+0x2a8/0x380 INFO: task Chrome_CacheThr:11483 blocked for more than 120 seconds. Tainted: G W 3.14.0-rc6+ #330 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Chrome_CacheThr D cd8415a0 0 11483 1 0x00000000 eed49d68 00000046 00000000 cd8415a0 cd8415e8 00000000 00000003 985da8c6 00009c11 eed48008 c4bbf000 985f00d1 00009c11 cd8415a0 00000002 cd841ac4 00000371 000002c2 00000000 00584371 00000000 cd8415a0 00584371 00000000 Call Trace: [<c47dd0ce>] schedule+0x1e/0x60 [<c41a60fa>] start_this_handle+0x1ca/0x380 [<c40e6a7c>] ? cache_alloc_debugcheck_after+0x11c/0x1e0 [<c406d4d0>] ? bit_waitqueue+0x50/0x50 [<c41a643d>] journal_start+0x9d/0xd0 [<c4156d59>] ext3_journal_start_sb+0x29/0x50 [<c414dd3a>] ext3_dirty_inode+0x2a/0x80 [<c410f7a9>] __mark_inode_dirty+0x29/0x1d0 [<c4103041>] update_time+0x71/0xb0 [<c41030f3>] file_update_time+0x73/0xb0 [<c40b75d1>] __generic_file_aio_write+0x141/0x550 [<c40b7a32>] generic_file_aio_write+0x52/0xf0 [<c40ec0b4>] do_sync_write+0x64/0xa0 [<c40ecf6e>] vfs_write+0x9e/0x190 [<c40ec050>] ? do_sync_readv_writev+0x90/0x90 [<c40ed0ea>] SyS_pwrite64+0x8a/0xa0 [<c47e143f>] sysenter_do_call+0x12/0x31 [<c47e0000>] ? down_read_failed+0x40/0x160 2 locks held by Chrome_CacheThr/11483: #0: (sb_writers#3){......}, at: [<c40ed04a>] vfs_write+0x17a/0x190 #1: (&sb->s_type->i_mutex_key#10){......}, at: [<c40b7a20>] generic_file_aio_write+0x40/0xf0 INFO: task mpd:2653 blocked for more than 120 seconds. Tainted: G W 3.14.0-rc6+ #330 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mpd D c4074e6e 0 2653 1 0x00000000 eeee3c14 00000046 eeee3bcc c4074e6e c49d4998 00000000 c49d4976 522eb4b1 00009c24 eeee2008 c4bbf000 523065d0 00009c24 f5f065a0 00000378 086e2373 0000000b c46e6378 0001610d f5f065a0 c46e6378 0001610d eeee3c08 00000046 Call Trace: [<c4074e6e>] ? __lock_acquire+0x3ae/0xc80 [<c46e6378>] ? udp4_lib_lookup2+0x1e8/0x240 [<c46e6378>] ? udp4_lib_lookup2+0x1e8/0x240 [<c406d81e>] ? prepare_to_wait_exclusive+0x1e/0x70 [<c47dd0ce>] schedule+0x1e/0x60 [<c47dd15a>] io_schedule+0x4a/0x70 [<c4116368>] sleep_on_buffer+0x8/0x10 [<c47dd398>] __wait_on_bit_lock+0x48/0x90 [<c4530372>] ? thermal_remove_hwmon_sysfs+0x12/0x170 [<c4116360>] ? unmap_underlying_metadata+0x40/0x40 [<c4116360>] ? unmap_underlying_metadata+0x40/0x40 [<c47dd486>] out_of_line_wait_on_bit_lock+0xa6/0xc0 [<c406d570>] ? wake_atomic_t_function+0x50/0x50 [<c411750e>] __lock_buffer+0x2e/0x30 [<c41a5b31>] do_get_write_access+0x381/0x410 [<c414d931>] ? __ext3_get_inode_loc+0xb1/0x2e0 [<c41a5be3>] journal_get_write_access+0x23/0x40 [<c415b46f>] __ext3_journal_get_write_access+0x1f/0x50 [<c414dbe1>] ext3_reserve_inode_write+0x61/0x80 [<c41547a5>] ext3_orphan_add+0xc5/0x180 [<c4150970>] ext3_setattr+0x200/0x300 [<c403b4cb>] ? current_fs_time+0xb/0x20 [<c4104cb5>] notify_change+0x135/0x300 [<c40eb967>] ? do_truncate+0x57/0xa0 [<c40eb973>] do_truncate+0x63/0xa0 [<c40eadc5>] ? do_dentry_open+0x215/0x270 [<c40f900b>] do_last+0x4cb/0xb30 [<c40f6371>] ? inode_permission+0x11/0x50 [<c40f6aed>] ? link_path_walk+0x1ed/0x730 [<c40f971b>] path_openat+0xab/0x540 [<c40311d1>] ? kernel_map_pages+0x71/0xf0 [<c40f9cb3>] do_filp_open+0x33/0x80 [<c40ea8e1>] do_sys_open+0x121/0x220 [<c408e838>] ? getnstimeofday+0x8/0x20 [<c40eaa1d>] SyS_open+0x1d/0x20 [<c47e143f>] sysenter_do_call+0x12/0x31 4 locks held by mpd/2653: #0: (sb_writers#3){......}, at: [<c410a791>] mnt_want_write+0x21/0x50 #1: (&sb->s_type->i_mutex_key#10){......}, at: [<c40eb967>] do_truncate+0x57/0xa0 #2: (jbd_handle){......}, at: [<c41a61d8>] start_this_handle+0x2a8/0x380 #3: (&sbi->s_orphan_lock){......}, at: [<c4154709>] ext3_orphan_add+0x29/0x180 ata5.00: disabled ata5.00: detaching (SCSI 4:0:0:0) acpi PNP0401:00: Cannot transition to non-D0 state from D3 ACPI: \_SB_.GDCK: undocking usb 1-6: USB disconnect, device number 18 usb 1-6.1: USB disconnect, device number 19 usb 1-6.2: USB disconnect, device number 20 usb 1-6.4: USB disconnect, device number 25 ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event
-- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
| |