lkml.org 
[lkml]   [2014]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: da9052: Add ramp speed information for the DVC regulators
Date
Some LDOs and DCDCs have a fixed ramp speed of 6.25 mV/µs. This patch adds
the set_voltage_time_sel function to let consumers know about this.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/regulator/da9052-regulator.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 3adeaef..e0dbfec 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -240,6 +240,31 @@ static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}

+static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_sel,
+ unsigned int new_sel)
+{
+ struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
+ struct da9052_regulator_info *info = regulator->info;
+ int id = rdev_get_id(rdev);
+ int ret = 0;
+
+ /* The DVC controlled LDOs and DCDCs ramp with 6.25mV/µs after enabling
+ * the activate bit.
+ */
+ switch (id) {
+ case DA9052_ID_BUCK1:
+ case DA9052_ID_BUCK2:
+ case DA9052_ID_BUCK3:
+ case DA9052_ID_LDO2:
+ case DA9052_ID_LDO3:
+ ret = (new_sel - old_sel) * info->step_uV / 6250;
+ break;
+ }
+
+ return ret;
+}
+
static struct regulator_ops da9052_dcdc_ops = {
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
@@ -248,6 +273,7 @@ static struct regulator_ops da9052_dcdc_ops = {
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = da9052_regulator_set_voltage_sel,
+ .set_voltage_time_sel = da9052_regulator_set_voltage_time_sel,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -258,6 +284,7 @@ static struct regulator_ops da9052_ldo_ops = {
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = da9052_regulator_set_voltage_sel,
+ .set_voltage_time_sel = da9052_regulator_set_voltage_time_sel,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-06 16:21    [W:0.047 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site