lkml.org 
[lkml]   [2014]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] clk: at91: propagate rate change on system clks
Date
From: Boris BREZILLON <b.brezillon@overkiz.com>

System clks are just gates, and thus do not provide any rate operations.
Authorize clk rate change to be propagated to system clk parents.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
drivers/clk/at91/clk-system.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
index 8f7c043..a98557b 100644
--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -84,7 +84,8 @@ at91_clk_register_system(struct at91_pmc *pmc, const char *name,
* (see drivers/memory) which would request and enable the ddrck clock.
* When this is done we will be able to remove CLK_IGNORE_UNUSED flag.
*/
- init.flags = CLK_IGNORE_UNUSED;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT |
+ CLK_IGNORE_UNUSED;

sys->id = id;
sys->hw.init = &init;
--
1.8.5.2


\
 
 \ /
  Last update: 2014-02-05 10:21    [W:0.063 / U:2.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site