lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] clk: at91: propagate rate change on system clks
Hi Mike,

On 27/02/2014 01:42, Mike Turquette wrote:
> Quoting Jean-Jacques Hiblot (2014-02-05 00:37:36)
>> From: Boris BREZILLON <b.brezillon@overkiz.com>
>>
>> System clks are just gates, and thus do not provide any rate operations.
>> Authorize clk rate change to be propagated to system clk parents.
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>> ---
>> drivers/clk/at91/clk-system.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
>> index 8f7c043..a98557b 100644
>> --- a/drivers/clk/at91/clk-system.c
>> +++ b/drivers/clk/at91/clk-system.c
>> @@ -84,7 +84,8 @@ at91_clk_register_system(struct at91_pmc *pmc, const char *name,
>> * (see drivers/memory) which would request and enable the ddrck clock.
>> * When this is done we will be able to remove CLK_IGNORE_UNUSED flag.
>> */
>> - init.flags = CLK_IGNORE_UNUSED;
>> + init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT |
> Just wanted to do a quick sanity check here. Do you really need
> CLK_SET_RATE_GATE?

After taking a closer look, I'd say I don't need this flag, because it's
already set on programmable clks, am I right ?

Do you want me to send a new version removing this flag ?

> Otherwise these patches look fine.
>
> Regards,
> Mike
>
>> + CLK_IGNORE_UNUSED;
>>
>> sys->id = id;
>> sys->hw.init = &init;
>> --
>> 1.8.5.2
>>



\
 
 \ /
  Last update: 2014-02-27 10:01    [W:0.040 / U:1.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site