lkml.org 
[lkml]   [2014]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] ARM: dts: Add support of STid127 Soc.
Hi Srinivas

Thanks for reviewing, a V2 serie will be pushed with all required fixes.

Patrice

On 01/31/2014 01:50 PM, srinivas kandagatla wrote:
> Hi Patrice,
>
> On 30/01/14 14:55, Patrice CHOTARD wrote:
>> From: Alexandre TORGUE <alexandre.torgue@st.com>
>>
>> The STid127 integrates all harware components to function as a cable modem
> s/harware/hardware/
>
> s/STid127/STiD127
>
> Please fix other instances too.
>
>> or, in combination with a back end device, as a Gateway set top boxe.
> s/boxe/box/
>> Supported devices:
>> -UART0
>> -UART2
>>
>> Signed-off-by: alexandre torgue <alexandre.torgue@st.com>
>> ---
>> arch/arm/boot/dts/stid127-clock.dtsi | 31 ++++
>> arch/arm/boot/dts/stid127-pinctrl.dtsi | 245 ++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/stid127.dtsi | 130 +++++++++++++++++
>> 3 files changed, 406 insertions(+)
>> create mode 100644 arch/arm/boot/dts/stid127-clock.dtsi
>> create mode 100644 arch/arm/boot/dts/stid127-pinctrl.dtsi
>> create mode 100644 arch/arm/boot/dts/stid127.dtsi
>>
>> diff --git a/arch/arm/boot/dts/stid127-clock.dtsi b/arch/arm/boot/dts/stid127-clock.dtsi
>> new file mode 100644
>> index 0000000..c6cafa9
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/stid127-clock.dtsi
>> @@ -0,0 +1,31 @@
>> +/*
>> + * Copyright (C) 2013 STMicroelectronics (R&D) Limited
> 2014
>
>> + * Author(s): Giuseppe Cavallaro <peppe.cavallaro@st.com>
>> + * Alexandre Torgue <alexandre.torgue@st.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +/ {Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
>> + clocks {
>> + /*
>> + * ARM Peripheral clock for timers
>> + */
>> + arm_periph_clk: arm_periph_clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + clock-frequency = <100000000>;
>> + };
>> + /*
>> + * Bootloader initialized system infrastructure clock for
>> + * serial devices.
>> + */
>> + CLK_IC_LP_HD: clockgenA0@29 {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + clock-frequency = <100000000>;
>> + clock-output-names = "CLK_IC_LP_HD";
>> + };
>> + };
>> +};
>> diff --git a/arch/arm/boot/dts/stid127-pinctrl.dtsi b/arch/arm/boot/dts/stid127-pinctrl.dtsi
>> new file mode 100644
>> index 0000000..3fa66f3
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/stid127-pinctrl.dtsi
>> @@ -0,0 +1,245 @@
>> +/*
>> + * Copyright (C) 2012 STMicroelectronics Limited.
> 2014
>
>> + * Author(s): Giuseppe Cavallaro <peppe.cavallaro@st.com>
>> + * Alexandre Torgue <alexandre.torgue@st.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * publishhed by the Free Software Foundation.
> s/publishhed/published/
>
>> + */
>> +#include "st-pincfg.h"
>> +/ {
>> + aliases {
>> + gpio0 = &PIO0;
>> + gpio1 = &PIO1;
>> + gpio2 = &PIO2;
>> + gpio3 = &PIO3;
>> + gpio4 = &PIO4;
>> + gpio5 = &PIO5;
>> + gpio6 = &PIO6;
>> + gpio7 = &PIO7;
>> + gpio8 = &PIO8;
>> + gpio9 = &PIO9;
>> + gpio10 = &PIO10;
>> + gpio11 = &PIO11;
>> + gpio12 = &PIO12;
>> + gpio13 = &PIO13;
>> + gpio14 = &PIO14;
>> + gpio15 = &PIO15;
>> + gpio16 = &PIO16;
>> + gpio17 = &PIO17;
>> + gpio18 = &PIO18;
>> + gpio19 = &PIO19;
>> + gpio20 = &PIO20;
>> + gpio21 = &PIO21;
>> + gpio22 = &PIO22;
>> +
>> + };
>> +
>> + soc {
>> + pin-controller-pwest {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "st,stid127-pwest-pinctrl";
>> + st,syscfg = <&syscfg_pwest>;
>> + ranges = <0 0xfebe0000 0x8000>;
> Can you add interrupt controller support to the pin controller.
>
> Patches are in : https://lkml.org/lkml/2014/1/16/342
> All these patches are due to be in v3.15.
>
>> +
>> + PIO0: gpio@febe0000 {
>> + gpio-controller;
>> + #gpio-cells = <1>;
>> + reg = <0 0x100>;
>> + interrupts = <0 149 0>;
>> + st,bank-name = "PIO0";
>> + };
>> + rx = <&PIO3 0 ALT2 IN>;
>> + };
>> + };
>> + };
>> +
>> + };
> unnecessary empty line here.
>
>> diff --git a/arch/arm/boot/dts/stid127.dtsi b/arch/arm/boot/dts/stid127.dtsi
>> new file mode 100644
>> index 0000000..a6f0b8fe
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/stid127.dtsi
>> @@ -0,0 +1,130 @@
>> +/*
>> + * Copyright (C) 2013 STMicroelectronics Limited.
> 2014
>> + * Author(s): Giuseppe Cavallaro <peppe.cavallaro@st.com>
>> + * Alexandre Torgue <alexandre.torgue@st.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * publishhed by the Free Software Foundation.
> s/publishhed/published/
>
>> + */
>> +#include "stid127-pinctrl.dtsi"
>> +#include "stid127-clock.dtsi"
>> +/ {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + reg = <0>;
>> + };
>> + cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + reg = <1>;
>> + };
>> + };
>> +
>> + intc: interrupt-controller@fffe1000 {
>> + compatible = "arm,cortex-a9-gic";
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + reg = <0xfffe1000 0x1000>,
>> + <0xfffe0100 0x100>;
>> + };
>> +
>> + scu@fffe0000 {
>> + compatible = "arm,cortex-a9-scu";
>> + reg = <0xfffe0000 0x1000>;
>> + };
>> +
>> + timer@fffe0200 {
>> + interrupt-parent = <&intc>;
>> + compatible = "arm,cortex-a9-global-timer";
>> + reg = <0xfffe0200 0x100>;
>> + interrupts = <1 11 0x04>;
>> + clocks = <&arm_periph_clk>;
> Fix the tab spacing here.
>
> Thanks,
> srini



\
 
 \ /
  Last update: 2014-02-05 11:41    [W:0.128 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site