lkml.org 
[lkml]   [2014]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[PATCH v4 0/8] Allow Link state changes for Hot-Plug
Hello,

This patch set enables the use of PCI Express link up and link down events
for Hotplug or Unplug. This is the pretty much the same patchset as v3, only
resending after rebasing on top of 3.14-rc1.

(As a side effect, this patch also fixes the bug
https://bugzilla.kernel.org/show_bug.cgi?id=65521 )

I'd appreciate if you could please review and provide me with any comments.

Thanks,

Rajat

Rajat Jain (8):
pciehp: Make check_link_active() non-static
pciehp: Use link change notifications for hot-plug and removal
pciehp: Enable link state change notifications
pciehp: Don't disable the link permanently, during removal
pciehp: Don't check for adapter or latch status while disabling
pciehp: Disabling the link notification across slot reset
pciehp: Ensure very fast hotplug events are also processed.
pciehp: Introduce hotplug_lock to serialize HP events

drivers/pci/hotplug/pciehp.h | 5 ++
drivers/pci/hotplug/pciehp_core.c | 7 +-
drivers/pci/hotplug/pciehp_ctrl.c | 149 ++++++++++++++++++++++++++++++-------
drivers/pci/hotplug/pciehp_hpc.c | 74 +++++++++---------
4 files changed, 169 insertions(+), 66 deletions(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2014-02-05 04:01    [W:0.181 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site