Messages in this thread | | | Date | Tue, 4 Feb 2014 16:16:38 -0500 | From | Matt Porter <> | Subject | Re: [PATCH 2/6] regulator: add bcm59056 pmu DT binding |
| |
On Tue, Feb 04, 2014 at 05:23:09PM +0000, Mark Brown wrote: > On Tue, Feb 04, 2014 at 07:19:08AM -0500, Matt Porter wrote: > > Add a DT binding for the BCM59056 PMU. The binding inherits from > > the generic regulator bindings. > > Is this really only a regulator - does the chip have no other functions?
It's your average multi-function device with other functions as you are suspecting. Buried in the the MFD driver comments is me admitting that I need to split this into two bindings. The base device, "bcm59056" and then "bcm59056-reg". So point noted, I'll updated with the appropriate binding for each.
> > +- regulators: This is the list of child nodes that specify the regulator > > + initialization data for defined regulators. Generic regulator bindings > > + are described in regulator/regulator.txt. > > The regulators property should always be optional, the driver should be > able to start up and read back the hardware state without any further > configuration.
Ahh, ok. I will make it so.
Thanks, Matt
| |