lkml.org 
[lkml]   [2014]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH 0/2] mtd: nand: add manafacturer specific handling
Date
Hello,

This is a proposal to add support for manufacturer specific handling of
NAND chips.

Currently the only ones allowed to modify how NAND chips are accessed are
NAND controllers (by modifying the nand_chip callbacks) and NAND core code
(by setting default callbacks when these are not specified by the NAND
controller).

This series adds support for manufacturer/vendor specific handling, which is
particularly useful for read retry implementation that are (at least for
the moment) manufacturer specific.

I know there was a debate on how we should support all these READ RETRY
implementations (see http://permalink.gmane.org/gmane.linux.drivers.mtd/50603),
so please tell if I'm wrong.

Best Regards,

Boris


Boris BREZILLON (2):
mtd: nand: add manufacturer specific init infrastructure
mtd: nand: add hynix specific initializer

drivers/mtd/nand/Makefile | 2 +-
drivers/mtd/nand/nand_base.c | 7 ++
drivers/mtd/nand/nand_hynix.c | 151 +++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/nand_ids.c | 3 +-
include/linux/mtd/nand.h | 6 ++
5 files changed, 167 insertions(+), 2 deletions(-)
create mode 100644 drivers/mtd/nand/nand_hynix.c

--
1.7.9.5



\
 
 \ /
  Last update: 2014-02-24 19:21    [W:0.070 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site