lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 26/38] staging/bcm: move IOCTL_BCM_NVM_[READ|WRITE] cases out to their own function.
bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines. Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
---
drivers/staging/bcm/Bcmchar.c | 290 ++++++++++++++++++++++--------------------
1 file changed, 149 insertions(+), 141 deletions(-)

diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index a5d5c58b5a90..3564018f56d7 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -1286,6 +1286,152 @@ static int bcm_char_ioctl_set_debug(void __user *argp, struct bcm_mini_adapter *
return STATUS_SUCCESS;
}

+static int bcm_char_ioctl_nvm_rw(void __user *argp, struct bcm_mini_adapter *Adapter, UINT cmd)
+{
+ struct bcm_nvm_readwrite stNVMReadWrite;
+ struct timeval tv0, tv1;
+ struct bcm_ioctl_buffer IoBuffer;
+ PUCHAR pReadData = NULL;
+ ULONG ulDSDMagicNumInUsrBuff = 0;
+ INT Status = STATUS_FAILURE;
+
+ memset(&tv0, 0, sizeof(struct timeval));
+ memset(&tv1, 0, sizeof(struct timeval));
+ if ((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
+ return -EFAULT;
+ }
+
+ if (IsFlash2x(Adapter)) {
+ if ((Adapter->eActiveDSD != DSD0) &&
+ (Adapter->eActiveDSD != DSD1) &&
+ (Adapter->eActiveDSD != DSD2)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No DSD is active..hence NVM Command is blocked");
+ return STATUS_FAILURE;
+ }
+ }
+
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
+ return -EFAULT;
+
+ if (copy_from_user(&stNVMReadWrite,
+ (IOCTL_BCM_NVM_READ == cmd) ? IoBuffer.OutputBuffer : IoBuffer.InputBuffer,
+ sizeof(struct bcm_nvm_readwrite)))
+ return -EFAULT;
+
+ /*
+ * Deny the access if the offset crosses the cal area limit.
+ */
+ if (stNVMReadWrite.uiNumBytes > Adapter->uiNVMDSDSize)
+ return STATUS_FAILURE;
+
+ if (stNVMReadWrite.uiOffset > Adapter->uiNVMDSDSize - stNVMReadWrite.uiNumBytes) {
+ /* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); */
+ return STATUS_FAILURE;
+ }
+
+ pReadData = memdup_user(stNVMReadWrite.pBuffer,
+ stNVMReadWrite.uiNumBytes);
+ if (IS_ERR(pReadData))
+ return PTR_ERR(pReadData);
+
+ do_gettimeofday(&tv0);
+ if (IOCTL_BCM_NVM_READ == cmd) {
+ down(&Adapter->NVMRdmWrmLock);
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return -EACCES;
+ }
+
+ Status = BeceemNVMRead(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes);
+ up(&Adapter->NVMRdmWrmLock);
+
+ if (Status != STATUS_SUCCESS) {
+ kfree(pReadData);
+ return Status;
+ }
+
+ if (copy_to_user(stNVMReadWrite.pBuffer, pReadData, stNVMReadWrite.uiNumBytes)) {
+ kfree(pReadData);
+ return -EFAULT;
+ }
+ } else {
+ down(&Adapter->NVMRdmWrmLock);
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return -EACCES;
+ }
+
+ Adapter->bHeaderChangeAllowed = TRUE;
+ if (IsFlash2x(Adapter)) {
+ /*
+ * New Requirement:-
+ * DSD section updation will be allowed in two case:-
+ * 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
+ * 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
+ * corrupted then user space program first modify the DSD header with valid DSD sig so
+ * that this as well as further write may be worthwhile.
+ *
+ * This restriction has been put assuming that if DSD sig is corrupted, DSD
+ * data won't be considered valid.
+ */
+
+ Status = BcmFlash2xCorruptSig(Adapter, Adapter->eActiveDSD);
+ if (Status != STATUS_SUCCESS) {
+ if (((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != Adapter->uiNVMDSDSize) ||
+ (stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return Status;
+ }
+
+ ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE));
+ if (ulDSDMagicNumInUsrBuff != DSD_IMAGE_MAGIC_NUMBER) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return Status;
+ }
+ }
+ }
+
+ Status = BeceemNVMWrite(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, stNVMReadWrite.bVerify);
+ if (IsFlash2x(Adapter))
+ BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD);
+
+ Adapter->bHeaderChangeAllowed = false;
+
+ up(&Adapter->NVMRdmWrmLock);
+
+ if (Status != STATUS_SUCCESS) {
+ kfree(pReadData);
+ return Status;
+ }
+ }
+
+ do_gettimeofday(&tv1);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n", (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
+
+ kfree(pReadData);
+ return STATUS_SUCCESS;
+}
+

static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
{
@@ -1479,147 +1625,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
return Status;

case IOCTL_BCM_NVM_READ:
- case IOCTL_BCM_NVM_WRITE: {
- struct bcm_nvm_readwrite stNVMReadWrite;
- PUCHAR pReadData = NULL;
- ULONG ulDSDMagicNumInUsrBuff = 0;
- struct timeval tv0, tv1;
- memset(&tv0, 0, sizeof(struct timeval));
- memset(&tv1, 0, sizeof(struct timeval));
- if ((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
- return -EFAULT;
- }
-
- if (IsFlash2x(Adapter)) {
- if ((Adapter->eActiveDSD != DSD0) &&
- (Adapter->eActiveDSD != DSD1) &&
- (Adapter->eActiveDSD != DSD2)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No DSD is active..hence NVM Command is blocked");
- return STATUS_FAILURE;
- }
- }
-
- /* Copy Ioctl Buffer structure */
- if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)))
- return -EFAULT;
-
- if (copy_from_user(&stNVMReadWrite,
- (IOCTL_BCM_NVM_READ == cmd) ? IoBuffer.OutputBuffer : IoBuffer.InputBuffer,
- sizeof(struct bcm_nvm_readwrite)))
- return -EFAULT;
-
- /*
- * Deny the access if the offset crosses the cal area limit.
- */
- if (stNVMReadWrite.uiNumBytes > Adapter->uiNVMDSDSize)
- return STATUS_FAILURE;
-
- if (stNVMReadWrite.uiOffset > Adapter->uiNVMDSDSize - stNVMReadWrite.uiNumBytes) {
- /* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); */
- return STATUS_FAILURE;
- }
-
- pReadData = memdup_user(stNVMReadWrite.pBuffer,
- stNVMReadWrite.uiNumBytes);
- if (IS_ERR(pReadData))
- return PTR_ERR(pReadData);
-
- do_gettimeofday(&tv0);
- if (IOCTL_BCM_NVM_READ == cmd) {
- down(&Adapter->NVMRdmWrmLock);
-
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return -EACCES;
- }
-
- Status = BeceemNVMRead(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes);
- up(&Adapter->NVMRdmWrmLock);
-
- if (Status != STATUS_SUCCESS) {
- kfree(pReadData);
- return Status;
- }
-
- if (copy_to_user(stNVMReadWrite.pBuffer, pReadData, stNVMReadWrite.uiNumBytes)) {
- kfree(pReadData);
- return -EFAULT;
- }
- } else {
- down(&Adapter->NVMRdmWrmLock);
-
- if ((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus == TRUE) ||
- (Adapter->bPreparingForLowPowerMode == TRUE)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return -EACCES;
- }
-
- Adapter->bHeaderChangeAllowed = TRUE;
- if (IsFlash2x(Adapter)) {
- /*
- * New Requirement:-
- * DSD section updation will be allowed in two case:-
- * 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
- * 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
- * corrupted then user space program first modify the DSD header with valid DSD sig so
- * that this as well as further write may be worthwhile.
- *
- * This restriction has been put assuming that if DSD sig is corrupted, DSD
- * data won't be considered valid.
- */
-
- Status = BcmFlash2xCorruptSig(Adapter, Adapter->eActiveDSD);
- if (Status != STATUS_SUCCESS) {
- if (((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != Adapter->uiNVMDSDSize) ||
- (stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE)) {
-
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return Status;
- }
-
- ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE));
- if (ulDSDMagicNumInUsrBuff != DSD_IMAGE_MAGIC_NUMBER) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return Status;
- }
- }
- }
-
- Status = BeceemNVMWrite(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, stNVMReadWrite.bVerify);
- if (IsFlash2x(Adapter))
- BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD);
-
- Adapter->bHeaderChangeAllowed = false;
-
- up(&Adapter->NVMRdmWrmLock);
-
- if (Status != STATUS_SUCCESS) {
- kfree(pReadData);
- return Status;
- }
- }
-
- do_gettimeofday(&tv1);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n", (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
-
- kfree(pReadData);
- return STATUS_SUCCESS;
- }
+ case IOCTL_BCM_NVM_WRITE:
+ Status = bcm_char_ioctl_nvm_rw(argp, Adapter, cmd);
+ return Status;

case IOCTL_BCM_FLASH2X_SECTION_READ: {
struct bcm_flash2x_readwrite sFlash2xRead = {0};
--
1.8.5.3


\
 
 \ /
  Last update: 2014-02-14 01:41    [W:0.042 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site