lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] sound/soc/adi/axi-spdif.c: Support programmable master clock
Date
If the master clock supports programmable rates, program it to generate
the desired frequency. Only apply constraints when the clock is fixed.
This allows proper clock generation for both 44100 and 48000 Hz based
sampling rates if the platform supports it.

The clock frequency must be set before enabling it. Enabling the clock
was done in "startup", but that occurs before "hw_params" where the rate
is known. Move the clock start to the hw_params routine, and keep track
of whether the clock has been started, because shutdown may be called
without having called hw_params first.

Starting the clock and enabling the SPDIF output AFTER programming the
dividers is a more logical order anyway.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
sound/soc/adi/axi-spdif.c | 56 ++++++++++++++++++++++++++++-----------------
1 file changed, 35 insertions(+), 21 deletions(-)

diff --git a/sound/soc/adi/axi-spdif.c b/sound/soc/adi/axi-spdif.c
index 198e3a4..d67e010 100644
--- a/sound/soc/adi/axi-spdif.c
+++ b/sound/soc/adi/axi-spdif.c
@@ -4,7 +4,6 @@
*
* Licensed under the GPL-2.
*/
-
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -44,6 +43,8 @@ struct axi_spdif {

struct snd_ratnum ratnum;
struct snd_pcm_hw_constraint_ratnums rate_constraints;
+
+ bool clk_ref_running;
};

static int axi_spdif_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -79,6 +80,7 @@ static int axi_spdif_hw_params(struct snd_pcm_substream *substream,
struct axi_spdif *spdif = snd_soc_dai_get_drvdata(dai);
unsigned int rate = params_rate(params);
unsigned int clkdiv, stat;
+ int ret;

switch (params_rate(params)) {
case 32000:
@@ -95,6 +97,9 @@ static int axi_spdif_hw_params(struct snd_pcm_substream *substream,
break;
}

+ /* Try to set the master clock */
+ clk_set_rate(spdif->clk_ref, rate * 128);
+
clkdiv = DIV_ROUND_CLOSEST(clk_get_rate(spdif->clk_ref),
rate * 64 * 2) - 1;
clkdiv <<= AXI_SPDIF_CTRL_CLKDIV_OFFSET;
@@ -103,6 +108,14 @@ static int axi_spdif_hw_params(struct snd_pcm_substream *substream,
regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
AXI_SPDIF_CTRL_CLKDIV_MASK, clkdiv);

+ ret = clk_prepare_enable(spdif->clk_ref);
+ if (ret)
+ return ret;
+ spdif->clk_ref_running = true;
+
+ regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
+ AXI_SPDIF_CTRL_TXEN, AXI_SPDIF_CTRL_TXEN);
+
return 0;
}

@@ -121,18 +134,13 @@ static int axi_spdif_startup(struct snd_pcm_substream *substream,
struct axi_spdif *spdif = snd_soc_dai_get_drvdata(dai);
int ret;

- ret = snd_pcm_hw_constraint_ratnums(substream->runtime, 0,
- SNDRV_PCM_HW_PARAM_RATE,
- &spdif->rate_constraints);
- if (ret)
- return ret;
-
- ret = clk_prepare_enable(spdif->clk_ref);
- if (ret)
- return ret;
-
- regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
- AXI_SPDIF_CTRL_TXEN, AXI_SPDIF_CTRL_TXEN);
+ if (spdif->rate_constraints.nrats) {
+ ret = snd_pcm_hw_constraint_ratnums(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &spdif->rate_constraints);
+ if (ret)
+ return ret;
+ }

return 0;
}
@@ -145,7 +153,10 @@ static void axi_spdif_shutdown(struct snd_pcm_substream *substream,
regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
AXI_SPDIF_CTRL_TXEN, 0);

- clk_disable_unprepare(spdif->clk_ref);
+ if (spdif->clk_ref_running) {
+ clk_disable_unprepare(spdif->clk_ref);
+ spdif->clk_ref_running = false;
+ }
}

static const struct snd_soc_dai_ops axi_spdif_dai_ops = {
@@ -216,14 +227,17 @@ static int axi_spdif_probe(struct platform_device *pdev)
spdif->dma_data.addr_width = 4;
spdif->dma_data.maxburst = 1;

- spdif->ratnum.num = clk_get_rate(spdif->clk_ref) / 128;
- spdif->ratnum.den_step = 1;
- spdif->ratnum.den_min = 1;
- spdif->ratnum.den_max = 64;
-
- spdif->rate_constraints.rats = &spdif->ratnum;
- spdif->rate_constraints.nrats = 1;
+ /* Determine if the clock rate is fixed. If it cannot change frequency,
+ * it returns an error here. */
+ if (clk_round_rate(spdif->clk_ref, 128 * 44100) < 0) {
+ spdif->ratnum.num = clk_get_rate(spdif->clk_ref) / 128;
+ spdif->ratnum.den_step = 1;
+ spdif->ratnum.den_min = 1;
+ spdif->ratnum.den_max = 64;

+ spdif->rate_constraints.rats = &spdif->ratnum;
+ spdif->rate_constraints.nrats = 1;
+ }
ret = devm_snd_soc_register_component(&pdev->dev, &axi_spdif_component,
&axi_spdif_dai, 1);
if (ret)
--
1.7.9.5


\
 
 \ /
  Last update: 2014-12-04 08:21    [W:0.067 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site