lkml.org 
[lkml]   [2014]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC v4 11/21] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
Date
This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
host controller DRM bridge driver.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
---
v3->v4:
* Newly introduced in v4. This is separated from the relevant driver patch
in v3 to address Stefan Wahren's comment.

.../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 72 ++++++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt

diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
new file mode 100644
index 0000000..5dcbd9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
@@ -0,0 +1,72 @@
+Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
+
+The controller is a digital core that implements all protocol functions
+defined in the MIPI DSI specification, providing an interface between
+the system and the MIPI DPHY, and allowing communication with a MIPI DSI
+compliant display.
+
+Required properties:
+ - #address-cells: Should be <1>.
+ - #size-cells: Should be <0>.
+ - compatible: The compatible string should be "fsl,imx6q-mipi-dsi" for
+ i.MX6q/sdl SoCs. For other SoCs, please refer to their specific
+ device tree binding documentations.
+ - reg: Represent the physical address range of the controller.
+ - interrupts: Represent the controller's interrupt to the CPU(s).
+ - clocks, clock-names: Phandles to the controller pll reference and
+ core configuration clocks, as described in [1].
+
+For more required properties, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+Required sub-nodes:
+ - A node to represent a DSI peripheral as described in [2].
+
+For more required sub-nodes, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+
+example:
+ gpr: iomuxc-gpr@020e0000 {
+ /* ... */
+ };
+
+ mipi_dsi: mipi@021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-mipi-dsi";
+ reg = <0x021e0000 0x4000>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ gpr = <&gpr>;
+ clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+ <&clks IMX6QDL_CLK_MIPI_CORE_CFG>;
+ clock-names = "pllref", "core_cfg";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ input-port;
+
+ mipi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_mipi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ input-port;
+
+ mipi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "truly,tft480800-16-e-dsi";
+ reg = <0>;
+ /* ... */
+ };
+ };
--
2.1.0


\
 
 \ /
  Last update: 2014-12-23 11:41    [W:1.437 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site