Messages in this thread Patch in this message | | | From | Geert Uytterhoeven <> | Subject | [PATCH 6/8] ARM: shmobile: kzm9g dts: Move Ethernet node to BSC | Date | Wed, 17 Dec 2014 19:49:11 +0100 |
| |
Move the Ethernet node from the root of the device tree to the BSC node, as its connected to the Bus State Controller. This allows the system to know the right position of the Ethernet node in the clock and PM domain hierarchy, and manage the clock and PM domain appropriately.
Also rename the node's name from "lan9220" to "ethernet", to conform to ePAPR generic name recomendations.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - s/confirm/conform/ - Moved from kzm9g-reference to kzm9g --- arch/arm/boot/dts/sh73a0-kzm9g.dts | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index fce37b96394d0ee3..3e8aacb6ca1f2d06 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -84,19 +84,6 @@ enable-active-high; }; - lan9220@10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x10000000 0x100>; - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - smsc,irq-push-pull; - smsc,save-mac-address; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; - leds { compatible = "gpio-leds"; led1 { @@ -178,6 +165,21 @@ }; }; +&bsc { + ethernet@10000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x10000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg-io-width = <4>; + smsc,irq-push-pull; + smsc,save-mac-address; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; + &cmt1 { status = "okay"; }; -- 1.9.1
| |