lkml.org 
[lkml]   [2014]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] drivers: bus: Add Simple Power-Managed Bus DT Bindings
Date
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- New
---
.../devicetree/bindings/bus/simple-pm-bus.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.txt

diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt
new file mode 100644
index 0000000000000000..bc5f985fd5463afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt
@@ -0,0 +1,49 @@
+Simple Power-Managed Bus
+========================
+
+A Simple Power-Managed Bus is a transparent bus that doesn't need a real
+driver, as it's typically initialized by the boot loader.
+
+However, its bus controller is part of a PM domain, or under the control of a
+functional clock. Hence, the bus controller's PM domain and/or clock must be
+enabled for child devices connected to the bus (either on-SoC or externally)
+to function.
+
+
+Generic compatible values and properties
+----------------------------------------
+
+Required properties:
+ - compatible: Must be at least one of the vendor-specific compatible values
+ from a vendor-specific section below, and "simple-bus" as a
+ fallback.
+
+Optional platform-specific properties for clock or PM domain control (at least
+one of them is required):
+ - clocks: Must contain a reference to the functional clock(s),
+ - power-domains: Must contain a reference to the PM domain.
+
+
+Vendor-specific compatible values and properties
+------------------------------------------------
+
+Renesas Bus State Controller (BSC):
+ - compatible: Must be an SoC-specific value, and "renesas,bsc" as a fallback.
+ SoC-specific values can be:
+ "renesas,bsc-r8a73a4" for R-Mobile APE6 (r8a73a4)
+ "renesas,bsc-sh73a0" for SH-Mobile AG5 (sh73a0)
+ - interrupts: Must contain a reference to the BSC interrupt, if available.
+
+
+Example:
+
+ bsc: bus@fec10000 {
+ compatible = "renesas,bsc-sh73a0", "renesas,bsc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xfec10000 0x400>;
+ ranges = <0 0 0x20000000>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&zb_clk>;
+ power-domains = <&pd_a4s>;
+ };
--
1.9.1


\
 
 \ /
  Last update: 2014-12-17 20:21    [W:0.872 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site